use std::cell::RefCell;
use std::collections::HashMap;
use std::panic::AssertUnwindSafe;
use std::sync::Arc;

#[cfg(feature = "perf-literal")]
use aho_corasick::{AhoCorasick, AhoCorasickBuilder, MatchKind};
use regex_syntax::hir::literal::Literals;
use regex_syntax::hir::Hir;
use regex_syntax::ParserBuilder;

use crate::backtrack;
use crate::compile::Compiler;
#[cfg(feature = "perf-dfa")]
use crate::dfa;
use crate::error::Error;
use crate::input::{ByteInput, CharInput};
use crate::literal::LiteralSearcher;
use crate::pikevm;
use crate::pool::{Pool, PoolGuard};
use crate::prog::Program;
use crate::re_builder::RegexOptions;
use crate::re_bytes;
use crate::re_set;
use crate::re_trait::{Locations, RegularExpression, Slot};
use crate::re_unicode;
use crate::utf8::next_utf8;

/// `Exec` manages the execution of a regular expression.
///
/// In particular, this manages the various compiled forms of a single regular
/// expression and the choice of which matching engine to use to execute a
/// regular expression.
#[derive(Debug)]
pub struct Exec {
    /// All read only state.
    ro: Arc<ExecReadOnly>,
    /// A pool of reusable values for the various matching engines.
    ///
    /// Note that boxing this value is not strictly necessary, but it is an
    /// easy way to ensure that T does not bloat the stack sized used by a pool
    /// in the case where T is big. And this turns out to be the case at the
    /// time of writing for regex's use of this pool. At the time of writing,
    /// the size of a Regex on the stack is 856 bytes. Boxing this value
    /// reduces that size to 16 bytes.
    pool: Box<Pool<ProgramCache>>,
}

/// `ExecNoSync` is like `Exec`, except it embeds a reference to a cache. This
/// means it is no longer Sync, but we can now avoid the overhead of
/// synchronization to fetch the cache.
#[derive(Debug)]
pub struct ExecNoSync<'c> {
    /// All read only state.
    ro: &'c Arc<ExecReadOnly>,
    /// Caches for the various matching engines.
    cache: PoolGuard<'c, ProgramCache>,
}

/// `ExecNoSyncStr` is like `ExecNoSync`, but matches on &str instead of &[u8].
#[derive(Debug)]
pub struct ExecNoSyncStr<'c>(ExecNoSync<'c>);

/// `ExecReadOnly` comprises all read only state for a regex. Namely, all such
/// state is determined at compile time and never changes during search.
#[derive(Debug)]
struct ExecReadOnly {
    /// The original regular expressions given by the caller to compile.
    res: Vec<String>,
    /// A compiled program that is used in the NFA simulation and backtracking.
    /// It can be byte-based or Unicode codepoint based.
    ///
    /// N.B. It is not possibly to make this byte-based from the public API.
    /// It is only used for testing byte based programs in the NFA simulations.
    nfa: Program,
    /// A compiled byte based program for DFA execution. This is only used
    /// if a DFA can be executed. (Currently, only word boundary assertions are
    /// not supported.) Note that this program contains an embedded `.*?`
    /// preceding the first capture group, unless the regex is anchored at the
    /// beginning.
    dfa: Program,
    /// The same as above, except the program is reversed (and there is no
    /// preceding `.*?`). This is used by the DFA to find the starting location
    /// of matches.
    dfa_reverse: Program,
    /// A set of suffix literals extracted from the regex.
    ///
    /// Prefix literals are stored on the `Program`, since they are used inside
    /// the matching engines.
    suffixes: LiteralSearcher,
    /// An Aho-Corasick automaton with leftmost-first match semantics.
    ///
    /// This is only set when the entire regex is a simple unanchored
    /// alternation of literals. We could probably use it more circumstances,
    /// but this is already hacky enough in this architecture.
    ///
    /// N.B. We use u32 as a state ID representation under the assumption that
    /// if we were to exhaust the ID space, we probably would have long
    /// surpassed the compilation size limit.
    #[cfg(feature = "perf-literal")]
    ac: Option<AhoCorasick<u32>>,
    /// match_type encodes as much upfront knowledge about how we're going to
    /// execute a search as possible.
    match_type: MatchType,
}

/// Facilitates the construction of an executor by exposing various knobs
/// to control how a regex is executed and what kinds of resources it's
/// permitted to use.
// `ExecBuilder` is only public via the `internal` module, so avoid deriving
// `Debug`.
#[allow(missing_debug_implementations)]
pub struct ExecBuilder {
    options: RegexOptions,
    match_type: Option<MatchType>,
    bytes: bool,
    only_utf8: bool,
}

/// Parsed represents a set of parsed regular expressions and their detected
/// literals.
struct Parsed {
    exprs: Vec<Hir>,
    prefixes: Literals,
    suffixes: Literals,
    bytes: bool,
}

impl ExecBuilder {
    /// Create a regex execution builder.
    ///
    /// This uses default settings for everything except the regex itself,
    /// which must be provided. Further knobs can be set by calling methods,
    /// and then finally, `build` to actually create the executor.
    pub fn new(re: &str) -> Self {
        Self::new_many(&[re])
    }

    /// Like new, but compiles the union of the given regular expressions.
    ///
    /// Note that when compiling 2 or more regular expressions, capture groups
    /// are completely unsupported. (This means both `find` and `captures`
    /// won't work.)
    pub fn new_many<I, S>(res: I) -> Self
    where
        S: AsRef<str>,
        I: IntoIterator<Item = S>,
    {
        let mut opts = RegexOptions::default();
        opts.pats = res.into_iter().map(|s| s.as_ref().to_owned()).collect();
        Self::new_options(opts)
    }

    /// Create a regex execution builder.
    pub fn new_options(opts: RegexOptions) -> Self {
        ExecBuilder {
            options: opts,
            match_type: None,
            bytes: false,
            only_utf8: true,
        }
    }

    /// Set the matching engine to be automatically determined.
    ///
    /// This is the default state and will apply whatever optimizations are
    /// possible, such as running a DFA.
    ///
    /// This overrides whatever was previously set via the `nfa` or
    /// `bounded_backtracking` methods.
    pub fn automatic(mut self) -> Self {
        self.match_type = None;
        self
    }

    /// Sets the matching engine to use the NFA algorithm no matter what
    /// optimizations are possible.
    ///
    /// This overrides whatever was previously set via the `automatic` or
    /// `bounded_backtracking` methods.
    pub fn nfa(mut self) -> Self {
        self.match_type = Some(MatchType::Nfa(MatchNfaType::PikeVM));
        self
    }

    /// Sets the matching engine to use a bounded backtracking engine no
    /// matter what optimizations are possible.
    ///
    /// One must use this with care, since the bounded backtracking engine
    /// uses memory proportion to `len(regex) * len(text)`.
    ///
    /// This overrides whatever was previously set via the `automatic` or
    /// `nfa` methods.
    pub fn bounded_backtracking(mut self) -> Self {
        self.match_type = Some(MatchType::Nfa(MatchNfaType::Backtrack));
        self
    }

    /// Compiles byte based programs for use with the NFA matching engines.
    ///
    /// By default, the NFA engines match on Unicode scalar values. They can
    /// be made to use byte based programs instead. In general, the byte based
    /// programs are slower because of a less efficient encoding of character
    /// classes.
    ///
    /// Note that this does not impact DFA matching engines, which always
    /// execute on bytes.
    pub fn bytes(mut self, yes: bool) -> Self {
        self.bytes = yes;
        self
    }

    /// When disabled, the program compiled may match arbitrary bytes.
    ///
    /// When enabled (the default), all compiled programs exclusively match
    /// valid UTF-8 bytes.
    pub fn only_utf8(mut self, yes: bool) -> Self {
        self.only_utf8 = yes;
        self
    }

    /// Set the Unicode flag.
    pub fn unicode(mut self, yes: bool) -> Self {
        self.options.unicode = yes;
        self
    }

    /// Parse the current set of patterns into their AST and extract literals.
    fn parse(&self) -> Result<Parsed, Error> {
        let mut exprs = Vec::with_capacity(self.options.pats.len());
        let mut prefixes = Some(Literals::empty());
        let mut suffixes = Some(Literals::empty());
        let mut bytes = false;
        let is_set = self.options.pats.len() > 1;
        // If we're compiling a regex set and that set has any anchored
        // expressions, then disable all literal optimizations.
        for pat in &self.options.pats {
            let mut parser = ParserBuilder::new()
                .octal(self.options.octal)
                .case_insensitive(self.options.case_insensitive)
                .multi_line(self.options.multi_line)
                .dot_matches_new_line(self.options.dot_matches_new_line)
                .swap_greed(self.options.swap_greed)
                .ignore_whitespace(self.options.ignore_whitespace)
                .unicode(self.options.unicode)
                .allow_invalid_utf8(!self.only_utf8)
                .nest_limit(self.options.nest_limit)
                .build();
            let expr =
                parser.parse(pat).map_err(|e| Error::Syntax(e.to_string()))?;
            bytes = bytes || !expr.is_always_utf8();

            if cfg!(feature = "perf-literal") {
                if !expr.is_anchored_start() && expr.is_any_anchored_start() {
                    // Partial anchors unfortunately make it hard to use
                    // prefixes, so disable them.
                    prefixes = None;
                } else if is_set && expr.is_anchored_start() {
                    // Regex sets with anchors do not go well with literal
                    // optimizations.
                    prefixes = None;
                }
                prefixes = prefixes.and_then(|mut prefixes| {
                    if !prefixes.union_prefixes(&expr) {
                        None
                    } else {
                        Some(prefixes)
                    }
                });

                if !expr.is_anchored_end() && expr.is_any_anchored_end() {
                    // Partial anchors unfortunately make it hard to use
                    // suffixes, so disable them.
                    suffixes = None;
                } else if is_set && expr.is_anchored_end() {
                    // Regex sets with anchors do not go well with literal
                    // optimizations.
                    suffixes = None;
                }
                suffixes = suffixes.and_then(|mut suffixes| {
                    if !suffixes.union_suffixes(&expr) {
                        None
                    } else {
                        Some(suffixes)
                    }
                });
            }
            exprs.push(expr);
        }
        Ok(Parsed {
            exprs: exprs,
            prefixes: prefixes.unwrap_or_else(Literals::empty),
            suffixes: suffixes.unwrap_or_else(Literals::empty),
            bytes: bytes,
        })
    }

    /// Build an executor that can run a regular expression.
    pub fn build(self) -> Result<Exec, Error> {
        // Special case when we have no patterns to compile.
        // This can happen when compiling a regex set.
        if self.options.pats.is_empty() {
            let ro = Arc::new(ExecReadOnly {
                res: vec![],
                nfa: Program::new(),
                dfa: Program::new(),
                dfa_reverse: Program::new(),
                suffixes: LiteralSearcher::empty(),
                #[cfg(feature = "perf-literal")]
                ac: None,
                match_type: MatchType::Nothing,
            });
            let pool = ExecReadOnly::new_pool(&ro);
            return Ok(Exec { ro: ro, pool });
        }
        let parsed = self.parse()?;
        let mut nfa = Compiler::new()
            .size_limit(self.options.size_limit)
            .bytes(self.bytes || parsed.bytes)
            .only_utf8(self.only_utf8)
            .compile(&parsed.exprs)?;
        let mut dfa = Compiler::new()
            .size_limit(self.options.size_limit)
            .dfa(true)
            .only_utf8(self.only_utf8)
            .compile(&parsed.exprs)?;
        let mut dfa_reverse = Compiler::new()
            .size_limit(self.options.size_limit)
            .dfa(true)
            .only_utf8(self.only_utf8)
            .reverse(true)
            .compile(&parsed.exprs)?;

        #[cfg(feature = "perf-literal")]
        let ac = self.build_aho_corasick(&parsed);
        nfa.prefixes = LiteralSearcher::prefixes(parsed.prefixes);
        dfa.prefixes = nfa.prefixes.clone();
        dfa.dfa_size_limit = self.options.dfa_size_limit;
        dfa_reverse.dfa_size_limit = self.options.dfa_size_limit;

        let mut ro = ExecReadOnly {
            res: self.options.pats,
            nfa: nfa,
            dfa: dfa,
            dfa_reverse: dfa_reverse,
            suffixes: LiteralSearcher::suffixes(parsed.suffixes),
            #[cfg(feature = "perf-literal")]
            ac: ac,
            match_type: MatchType::Nothing,
        };
        ro.match_type = ro.choose_match_type(self.match_type);

        let ro = Arc::new(ro);
        let pool = ExecReadOnly::new_pool(&ro);
        Ok(Exec { ro, pool })
    }

    #[cfg(feature = "perf-literal")]
    fn build_aho_corasick(&self, parsed: &Parsed) -> Option<AhoCorasick<u32>> {
        if parsed.exprs.len() != 1 {
            return None;
        }
        let lits = match alternation_literals(&parsed.exprs[0]) {
            None => return None,
            Some(lits) => lits,
        };
        // If we have a small number of literals, then let Teddy handle
        // things (see literal/mod.rs).
        if lits.len() <= 32 {
            return None;
        }
        Some(
            AhoCorasickBuilder::new()
                .match_kind(MatchKind::LeftmostFirst)
                .auto_configure(&lits)
                .build_with_size::<u32, _, _>(&lits)
                // This should never happen because we'd long exceed the
                // compilation limit for regexes first.
                .expect("AC automaton too big"),
        )
    }
}

impl<'c> RegularExpression for ExecNoSyncStr<'c> {
    type Text = str;

    fn slots_len(&self) -> usize {
        self.0.slots_len()
    }

    fn next_after_empty(&self, text: &str, i: usize) -> usize {
        next_utf8(text.as_bytes(), i)
    }

    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn shortest_match_at(&self, text: &str, start: usize) -> Option<usize> {
        self.0.shortest_match_at(text.as_bytes(), start)
    }

    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn is_match_at(&self, text: &str, start: usize) -> bool {
        self.0.is_match_at(text.as_bytes(), start)
    }

    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn find_at(&self, text: &str, start: usize) -> Option<(usize, usize)> {
        self.0.find_at(text.as_bytes(), start)
    }

    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn captures_read_at(
        &self,
        locs: &mut Locations,
        text: &str,
        start: usize,
    ) -> Option<(usize, usize)> {
        self.0.captures_read_at(locs, text.as_bytes(), start)
    }
}

impl<'c> RegularExpression for ExecNoSync<'c> {
    type Text = [u8];

    /// Returns the number of capture slots in the regular expression. (There
    /// are two slots for every capture group, corresponding to possibly empty
    /// start and end locations of the capture.)
    fn slots_len(&self) -> usize {
        self.ro.nfa.captures.len() * 2
    }

    fn next_after_empty(&self, _text: &[u8], i: usize) -> usize {
        i + 1
    }

    /// Returns the end of a match location, possibly occurring before the
    /// end location of the correct leftmost-first match.
    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn shortest_match_at(&self, text: &[u8], start: usize) -> Option<usize> {
        if !self.is_anchor_end_match(text) {
            return None;
        }
        match self.ro.match_type {
            #[cfg(feature = "perf-literal")]
            MatchType::Literal(ty) => {
                self.find_literals(ty, text, start).map(|(_, e)| e)
            }
            #[cfg(feature = "perf-dfa")]
            MatchType::Dfa | MatchType::DfaMany => {
                match self.shortest_dfa(text, start) {
                    dfa::Result::Match(end) => Some(end),
                    dfa::Result::NoMatch(_) => None,
                    dfa::Result::Quit => self.shortest_nfa(text, start),
                }
            }
            #[cfg(feature = "perf-dfa")]
            MatchType::DfaAnchoredReverse => {
                match dfa::Fsm::reverse(
                    &self.ro.dfa_reverse,
                    self.cache.value(),
                    true,
                    &text[start..],
                    text.len(),
                ) {
                    dfa::Result::Match(_) => Some(text.len()),
                    dfa::Result::NoMatch(_) => None,
                    dfa::Result::Quit => self.shortest_nfa(text, start),
                }
            }
            #[cfg(all(feature = "perf-dfa", feature = "perf-literal"))]
            MatchType::DfaSuffix => {
                match self.shortest_dfa_reverse_suffix(text, start) {
                    dfa::Result::Match(e) => Some(e),
                    dfa::Result::NoMatch(_) => None,
                    dfa::Result::Quit => self.shortest_nfa(text, start),
                }
            }
            MatchType::Nfa(ty) => self.shortest_nfa_type(ty, text, start),
            MatchType::Nothing => None,
        }
    }

    /// Returns true if and only if the regex matches text.
    ///
    /// For single regular expressions, this is equivalent to calling
    /// shortest_match(...).is_some().
    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn is_match_at(&self, text: &[u8], start: usize) -> bool {
        if !self.is_anchor_end_match(text) {
            return false;
        }
        // We need to do this dance because shortest_match relies on the NFA
        // filling in captures[1], but a RegexSet has no captures. In other
        // words, a RegexSet can't (currently) use shortest_match. ---AG
        match self.ro.match_type {
            #[cfg(feature = "perf-literal")]
            MatchType::Literal(ty) => {
                self.find_literals(ty, text, start).is_some()
            }
            #[cfg(feature = "perf-dfa")]
            MatchType::Dfa | MatchType::DfaMany => {
                match self.shortest_dfa(text, start) {
                    dfa::Result::Match(_) => true,
                    dfa::Result::NoMatch(_) => false,
                    dfa::Result::Quit => self.match_nfa(text, start),
                }
            }
            #[cfg(feature = "perf-dfa")]
            MatchType::DfaAnchoredReverse => {
                match dfa::Fsm::reverse(
                    &self.ro.dfa_reverse,
                    self.cache.value(),
                    true,
                    &text[start..],
                    text.len(),
                ) {
                    dfa::Result::Match(_) => true,
                    dfa::Result::NoMatch(_) => false,
                    dfa::Result::Quit => self.match_nfa(text, start),
                }
            }
            #[cfg(all(feature = "perf-dfa", feature = "perf-literal"))]
            MatchType::DfaSuffix => {
                match self.shortest_dfa_reverse_suffix(text, start) {
                    dfa::Result::Match(_) => true,
                    dfa::Result::NoMatch(_) => false,
                    dfa::Result::Quit => self.match_nfa(text, start),
                }
            }
            MatchType::Nfa(ty) => self.match_nfa_type(ty, text, start),
            MatchType::Nothing => false,
        }
    }

    /// Finds the start and end location of the leftmost-first match, starting
    /// at the given location.
    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn find_at(&self, text: &[u8], start: usize) -> Option<(usize, usize)> {
        if !self.is_anchor_end_match(text) {
            return None;
        }
        match self.ro.match_type {
            #[cfg(feature = "perf-literal")]
            MatchType::Literal(ty) => self.find_literals(ty, text, start),
            #[cfg(feature = "perf-dfa")]
            MatchType::Dfa => match self.find_dfa_forward(text, start) {
                dfa::Result::Match((s, e)) => Some((s, e)),
                dfa::Result::NoMatch(_) => None,
                dfa::Result::Quit => {
                    self.find_nfa(MatchNfaType::Auto, text, start)
                }
            },
            #[cfg(feature = "perf-dfa")]
            MatchType::DfaAnchoredReverse => {
                match self.find_dfa_anchored_reverse(text, start) {
                    dfa::Result::Match((s, e)) => Some((s, e)),
                    dfa::Result::NoMatch(_) => None,
                    dfa::Result::Quit => {
                        self.find_nfa(MatchNfaType::Auto, text, start)
                    }
                }
            }
            #[cfg(all(feature = "perf-dfa", feature = "perf-literal"))]
            MatchType::DfaSuffix => {
                match self.find_dfa_reverse_suffix(text, start) {
                    dfa::Result::Match((s, e)) => Some((s, e)),
                    dfa::Result::NoMatch(_) => None,
                    dfa::Result::Quit => {
                        self.find_nfa(MatchNfaType::Auto, text, start)
                    }
                }
            }
            MatchType::Nfa(ty) => self.find_nfa(ty, text, start),
            MatchType::Nothing => None,
            #[cfg(feature = "perf-dfa")]
            MatchType::DfaMany => {
                unreachable!("BUG: RegexSet cannot be used with find")
            }
        }
    }

    /// Finds the start and end location of the leftmost-first match and also
    /// fills in all matching capture groups.
    ///
    /// The number of capture slots given should be equal to the total number
    /// of capture slots in the compiled program.
    ///
    /// Note that the first two slots always correspond to the start and end
    /// locations of the overall match.
    fn captures_read_at(
        &self,
        locs: &mut Locations,
        text: &[u8],
        start: usize,
    ) -> Option<(usize, usize)> {
        let slots = locs.as_slots();
        for slot in slots.iter_mut() {
            *slot = None;
        }
        // If the caller unnecessarily uses this, then we try to save them
        // from themselves.
        match slots.len() {
            0 => return self.find_at(text, start),
            2 => {
                return self.find_at(text, start).map(|(s, e)| {
                    slots[0] = Some(s);
                    slots[1] = Some(e);
                    (s, e)
                });
            }
            _ => {} // fallthrough
        }
        if !self.is_anchor_end_match(text) {
            return None;
        }
        match self.ro.match_type {
            #[cfg(feature = "perf-literal")]
            MatchType::Literal(ty) => {
                self.find_literals(ty, text, start).and_then(|(s, e)| {
                    self.captures_nfa_type(
                        MatchNfaType::Auto,
                        slots,
                        text,
                        s,
                        e,
                    )
                })
            }
            #[cfg(feature = "perf-dfa")]
            MatchType::Dfa => {
                if self.ro.nfa.is_anchored_start {
                    self.captures_nfa(slots, text, start)
                } else {
                    match self.find_dfa_forward(text, start) {
                        dfa::Result::Match((s, e)) => self.captures_nfa_type(
                            MatchNfaType::Auto,
                            slots,
                            text,
                            s,
                            e,
                        ),
                        dfa::Result::NoMatch(_) => None,
                        dfa::Result::Quit => {
                            self.captures_nfa(slots, text, start)
                        }
                    }
                }
            }
            #[cfg(feature = "perf-dfa")]
            MatchType::DfaAnchoredReverse => {
                match self.find_dfa_anchored_reverse(text, start) {
                    dfa::Result::Match((s, e)) => self.captures_nfa_type(
                        MatchNfaType::Auto,
                        slots,
                        text,
                        s,
                        e,
                    ),
                    dfa::Result::NoMatch(_) => None,
                    dfa::Result::Quit => self.captures_nfa(slots, text, start),
                }
            }
            #[cfg(all(feature = "perf-dfa", feature = "perf-literal"))]
            MatchType::DfaSuffix => {
                match self.find_dfa_reverse_suffix(text, start) {
                    dfa::Result::Match((s, e)) => self.captures_nfa_type(
                        MatchNfaType::Auto,
                        slots,
                        text,
                        s,
                        e,
                    ),
                    dfa::Result::NoMatch(_) => None,
                    dfa::Result::Quit => self.captures_nfa(slots, text, start),
                }
            }
            MatchType::Nfa(ty) => {
                self.captures_nfa_type(ty, slots, text, start, text.len())
            }
            MatchType::Nothing => None,
            #[cfg(feature = "perf-dfa")]
            MatchType::DfaMany => {
                unreachable!("BUG: RegexSet cannot be used with captures")
            }
        }
    }
}

impl<'c> ExecNoSync<'c> {
    /// Finds the leftmost-first match using only literal search.
    #[cfg(feature = "perf-literal")]
    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn find_literals(
        &self,
        ty: MatchLiteralType,
        text: &[u8],
        start: usize,
    ) -> Option<(usize, usize)> {
        use self::MatchLiteralType::*;
        match ty {
            Unanchored => {
                let lits = &self.ro.nfa.prefixes;
                lits.find(&text[start..]).map(|(s, e)| (start + s, start + e))
            }
            AnchoredStart => {
                let lits = &self.ro.nfa.prefixes;
                if start == 0 || !self.ro.nfa.is_anchored_start {
                    lits.find_start(&text[start..])
                        .map(|(s, e)| (start + s, start + e))
                } else {
                    None
                }
            }
            AnchoredEnd => {
                let lits = &self.ro.suffixes;
                lits.find_end(&text[start..])
                    .map(|(s, e)| (start + s, start + e))
            }
            AhoCorasick => self
                .ro
                .ac
                .as_ref()
                .unwrap()
                .find(&text[start..])
                .map(|m| (start + m.start(), start + m.end())),
        }
    }

    /// Finds the leftmost-first match (start and end) using only the DFA.
    ///
    /// If the result returned indicates that the DFA quit, then another
    /// matching engine should be used.
    #[cfg(feature = "perf-dfa")]
    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn find_dfa_forward(
        &self,
        text: &[u8],
        start: usize,
    ) -> dfa::Result<(usize, usize)> {
        use crate::dfa::Result::*;
        let end = match dfa::Fsm::forward(
            &self.ro.dfa,
            self.cache.value(),
            false,
            text,
            start,
        ) {
            NoMatch(i) => return NoMatch(i),
            Quit => return Quit,
            Match(end) if start == end => return Match((start, start)),
            Match(end) => end,
        };
        // Now run the DFA in reverse to find the start of the match.
        match dfa::Fsm::reverse(
            &self.ro.dfa_reverse,
            self.cache.value(),
            false,
            &text[start..],
            end - start,
        ) {
            Match(s) => Match((start + s, end)),
            NoMatch(i) => NoMatch(i),
            Quit => Quit,
        }
    }

    /// Finds the leftmost-first match (start and end) using only the DFA,
    /// but assumes the regex is anchored at the end and therefore starts at
    /// the end of the regex and matches in reverse.
    ///
    /// If the result returned indicates that the DFA quit, then another
    /// matching engine should be used.
    #[cfg(feature = "perf-dfa")]
    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn find_dfa_anchored_reverse(
        &self,
        text: &[u8],
        start: usize,
    ) -> dfa::Result<(usize, usize)> {
        use crate::dfa::Result::*;
        match dfa::Fsm::reverse(
            &self.ro.dfa_reverse,
            self.cache.value(),
            false,
            &text[start..],
            text.len() - start,
        ) {
            Match(s) => Match((start + s, text.len())),
            NoMatch(i) => NoMatch(i),
            Quit => Quit,
        }
    }

    /// Finds the end of the shortest match using only the DFA.
    #[cfg(feature = "perf-dfa")]
    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn shortest_dfa(&self, text: &[u8], start: usize) -> dfa::Result<usize> {
        dfa::Fsm::forward(&self.ro.dfa, self.cache.value(), true, text, start)
    }

    /// Finds the end of the shortest match using only the DFA by scanning for
    /// suffix literals.
    #[cfg(all(feature = "perf-dfa", feature = "perf-literal"))]
    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn shortest_dfa_reverse_suffix(
        &self,
        text: &[u8],
        start: usize,
    ) -> dfa::Result<usize> {
        match self.exec_dfa_reverse_suffix(text, start) {
            None => self.shortest_dfa(text, start),
            Some(r) => r.map(|(_, end)| end),
        }
    }

    /// Finds the end of the shortest match using only the DFA by scanning for
    /// suffix literals. It also reports the start of the match.
    ///
    /// Note that if None is returned, then the optimization gave up to avoid
    /// worst case quadratic behavior. A forward scanning DFA should be tried
    /// next.
    ///
    /// If a match is returned and the full leftmost-first match is desired,
    /// then a forward scan starting from the beginning of the match must be
    /// done.
    ///
    /// If the result returned indicates that the DFA quit, then another
    /// matching engine should be used.
    #[cfg(all(feature = "perf-dfa", feature = "perf-literal"))]
    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn exec_dfa_reverse_suffix(
        &self,
        text: &[u8],
        original_start: usize,
    ) -> Option<dfa::Result<(usize, usize)>> {
        use crate::dfa::Result::*;

        let lcs = self.ro.suffixes.lcs();
        debug_assert!(lcs.len() >= 1);
        let mut start = original_start;
        let mut end = start;
        let mut last_literal = start;
        while end <= text.len() {
            last_literal += match lcs.find(&text[last_literal..]) {
                None => return Some(NoMatch(text.len())),
                Some(i) => i,
            };
            end = last_literal + lcs.len();
            match dfa::Fsm::reverse(
                &self.ro.dfa_reverse,
                self.cache.value(),
                false,
                &text[start..end],
                end - start,
            ) {
                Match(0) | NoMatch(0) => return None,
                Match(i) => return Some(Match((start + i, end))),
                NoMatch(i) => {
                    start += i;
                    last_literal += 1;
                    continue;
                }
                Quit => return Some(Quit),
            };
        }
        Some(NoMatch(text.len()))
    }

    /// Finds the leftmost-first match (start and end) using only the DFA
    /// by scanning for suffix literals.
    ///
    /// If the result returned indicates that the DFA quit, then another
    /// matching engine should be used.
    #[cfg(all(feature = "perf-dfa", feature = "perf-literal"))]
    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn find_dfa_reverse_suffix(
        &self,
        text: &[u8],
        start: usize,
    ) -> dfa::Result<(usize, usize)> {
        use crate::dfa::Result::*;

        let match_start = match self.exec_dfa_reverse_suffix(text, start) {
            None => return self.find_dfa_forward(text, start),
            Some(Match((start, _))) => start,
            Some(r) => return r,
        };
        // At this point, we've found a match. The only way to quit now
        // without a match is if the DFA gives up (seems unlikely).
        //
        // Now run the DFA forwards to find the proper end of the match.
        // (The suffix literal match can only indicate the earliest
        // possible end location, which may appear before the end of the
        // leftmost-first match.)
        match dfa::Fsm::forward(
            &self.ro.dfa,
            self.cache.value(),
            false,
            text,
            match_start,
        ) {
            NoMatch(_) => panic!("BUG: reverse match implies forward match"),
            Quit => Quit,
            Match(e) => Match((match_start, e)),
        }
    }

    /// Executes the NFA engine to return whether there is a match or not.
    ///
    /// Ideally, we could use shortest_nfa(...).is_some() and get the same
    /// performance characteristics, but regex sets don't have captures, which
    /// shortest_nfa depends on.
    #[cfg(feature = "perf-dfa")]
    fn match_nfa(&self, text: &[u8], start: usize) -> bool {
        self.match_nfa_type(MatchNfaType::Auto, text, start)
    }

    /// Like match_nfa, but allows specification of the type of NFA engine.
    fn match_nfa_type(
        &self,
        ty: MatchNfaType,
        text: &[u8],
        start: usize,
    ) -> bool {
        self.exec_nfa(
            ty,
            &mut [false],
            &mut [],
            true,
            false,
            text,
            start,
            text.len(),
        )
    }

    /// Finds the shortest match using an NFA.
    #[cfg(feature = "perf-dfa")]
    fn shortest_nfa(&self, text: &[u8], start: usize) -> Option<usize> {
        self.shortest_nfa_type(MatchNfaType::Auto, text, start)
    }

    /// Like shortest_nfa, but allows specification of the type of NFA engine.
    fn shortest_nfa_type(
        &self,
        ty: MatchNfaType,
        text: &[u8],
        start: usize,
    ) -> Option<usize> {
        let mut slots = [None, None];
        if self.exec_nfa(
            ty,
            &mut [false],
            &mut slots,
            true,
            true,
            text,
            start,
            text.len(),
        ) {
            slots[1]
        } else {
            None
        }
    }

    /// Like find, but executes an NFA engine.
    fn find_nfa(
        &self,
        ty: MatchNfaType,
        text: &[u8],
        start: usize,
    ) -> Option<(usize, usize)> {
        let mut slots = [None, None];
        if self.exec_nfa(
            ty,
            &mut [false],
            &mut slots,
            false,
            false,
            text,
            start,
            text.len(),
        ) {
            match (slots[0], slots[1]) {
                (Some(s), Some(e)) => Some((s, e)),
                _ => None,
            }
        } else {
            None
        }
    }

    /// Like find_nfa, but fills in captures.
    ///
    /// `slots` should have length equal to `2 * nfa.captures.len()`.
    #[cfg(feature = "perf-dfa")]
    fn captures_nfa(
        &self,
        slots: &mut [Slot],
        text: &[u8],
        start: usize,
    ) -> Option<(usize, usize)> {
        self.captures_nfa_type(
            MatchNfaType::Auto,
            slots,
            text,
            start,
            text.len(),
        )
    }

    /// Like captures_nfa, but allows specification of type of NFA engine.
    fn captures_nfa_type(
        &self,
        ty: MatchNfaType,
        slots: &mut [Slot],
        text: &[u8],
        start: usize,
        end: usize,
    ) -> Option<(usize, usize)> {
        if self.exec_nfa(
            ty,
            &mut [false],
            slots,
            false,
            false,
            text,
            start,
            end,
        ) {
            match (slots[0], slots[1]) {
                (Some(s), Some(e)) => Some((s, e)),
                _ => None,
            }
        } else {
            None
        }
    }

    fn exec_nfa(
        &self,
        mut ty: MatchNfaType,
        matches: &mut [bool],
        slots: &mut [Slot],
        quit_after_match: bool,
        quit_after_match_with_pos: bool,
        text: &[u8],
        start: usize,
        end: usize,
    ) -> bool {
        use self::MatchNfaType::*;
        if let Auto = ty {
            if backtrack::should_exec(self.ro.nfa.len(), text.len()) {
                ty = Backtrack;
            } else {
                ty = PikeVM;
            }
        }
        // The backtracker can't return the shortest match position as it is
        // implemented today. So if someone calls `shortest_match` and we need
        // to run an NFA, then use the PikeVM.
        if quit_after_match_with_pos || ty == PikeVM {
            self.exec_pikevm(
                matches,
                slots,
                quit_after_match,
                text,
                start,
                end,
            )
        } else {
            self.exec_backtrack(matches, slots, text, start, end)
        }
    }

    /// Always run the NFA algorithm.
    fn exec_pikevm(
        &self,
        matches: &mut [bool],
        slots: &mut [Slot],
        quit_after_match: bool,
        text: &[u8],
        start: usize,
        end: usize,
    ) -> bool {
        if self.ro.nfa.uses_bytes() {
            pikevm::Fsm::exec(
                &self.ro.nfa,
                self.cache.value(),
                matches,
                slots,
                quit_after_match,
                ByteInput::new(text, self.ro.nfa.only_utf8),
                start,
                end,
            )
        } else {
            pikevm::Fsm::exec(
                &self.ro.nfa,
                self.cache.value(),
                matches,
                slots,
                quit_after_match,
                CharInput::new(text),
                start,
                end,
            )
        }
    }

    /// Always runs the NFA using bounded backtracking.
    fn exec_backtrack(
        &self,
        matches: &mut [bool],
        slots: &mut [Slot],
        text: &[u8],
        start: usize,
        end: usize,
    ) -> bool {
        if self.ro.nfa.uses_bytes() {
            backtrack::Bounded::exec(
                &self.ro.nfa,
                self.cache.value(),
                matches,
                slots,
                ByteInput::new(text, self.ro.nfa.only_utf8),
                start,
                end,
            )
        } else {
            backtrack::Bounded::exec(
                &self.ro.nfa,
                self.cache.value(),
                matches,
                slots,
                CharInput::new(text),
                start,
                end,
            )
        }
    }

    /// Finds which regular expressions match the given text.
    ///
    /// `matches` should have length equal to the number of regexes being
    /// searched.
    ///
    /// This is only useful when one wants to know which regexes in a set
    /// match some text.
    pub fn many_matches_at(
        &self,
        matches: &mut [bool],
        text: &[u8],
        start: usize,
    ) -> bool {
        use self::MatchType::*;
        if !self.is_anchor_end_match(text) {
            return false;
        }
        match self.ro.match_type {
            #[cfg(feature = "perf-literal")]
            Literal(ty) => {
                debug_assert_eq!(matches.len(), 1);
                matches[0] = self.find_literals(ty, text, start).is_some();
                matches[0]
            }
            #[cfg(feature = "perf-dfa")]
            Dfa | DfaAnchoredReverse | DfaMany => {
                match dfa::Fsm::forward_many(
                    &self.ro.dfa,
                    self.cache.value(),
                    matches,
                    text,
                    start,
                ) {
                    dfa::Result::Match(_) => true,
                    dfa::Result::NoMatch(_) => false,
                    dfa::Result::Quit => self.exec_nfa(
                        MatchNfaType::Auto,
                        matches,
                        &mut [],
                        false,
                        false,
                        text,
                        start,
                        text.len(),
                    ),
                }
            }
            #[cfg(all(feature = "perf-dfa", feature = "perf-literal"))]
            DfaSuffix => {
                match dfa::Fsm::forward_many(
                    &self.ro.dfa,
                    self.cache.value(),
                    matches,
                    text,
                    start,
                ) {
                    dfa::Result::Match(_) => true,
                    dfa::Result::NoMatch(_) => false,
                    dfa::Result::Quit => self.exec_nfa(
                        MatchNfaType::Auto,
                        matches,
                        &mut [],
                        false,
                        false,
                        text,
                        start,
                        text.len(),
                    ),
                }
            }
            Nfa(ty) => self.exec_nfa(
                ty,
                matches,
                &mut [],
                false,
                false,
                text,
                start,
                text.len(),
            ),
            Nothing => false,
        }
    }

    #[cfg_attr(feature = "perf-inline", inline(always))]
    fn is_anchor_end_match(&self, text: &[u8]) -> bool {
        #[cfg(not(feature = "perf-literal"))]
        fn imp(_: &ExecReadOnly, _: &[u8]) -> bool {
            true
        }

        #[cfg(feature = "perf-literal")]
        fn imp(ro: &ExecReadOnly, text: &[u8]) -> bool {
            // Only do this check if the haystack is big (>1MB).
            if text.len() > (1 << 20) && ro.nfa.is_anchored_end {
                let lcs = ro.suffixes.lcs();
                if lcs.len() >= 1 && !lcs.is_suffix(text) {
                    return false;
                }
            }
            true
        }

        imp(&self.ro, text)
    }

    pub fn capture_name_idx(&self) -> &Arc<HashMap<String, usize>> {
        &self.ro.nfa.capture_name_idx
    }
}

impl<'c> ExecNoSyncStr<'c> {
    pub fn capture_name_idx(&self) -> &Arc<HashMap<String, usize>> {
        self.0.capture_name_idx()
    }
}

impl Exec {
    /// Get a searcher that isn't Sync.
    #[cfg_attr(feature = "perf-inline", inline(always))]
    pub fn searcher(&self) -> ExecNoSync<'_> {
        ExecNoSync {
            ro: &self.ro, // a clone is too expensive here! (and not needed)
            cache: self.pool.get(),
        }
    }

    /// Get a searcher that isn't Sync and can match on &str.
    #[cfg_attr(feature = "perf-inline", inline(always))]
    pub fn searcher_str(&self) -> ExecNoSyncStr<'_> {
        ExecNoSyncStr(self.searcher())
    }

    /// Build a Regex from this executor.
    pub fn into_regex(self) -> re_unicode::Regex {
        re_unicode::Regex::from(self)
    }

    /// Build a RegexSet from this executor.
    pub fn into_regex_set(self) -> re_set::unicode::RegexSet {
        re_set::unicode::RegexSet::from(self)
    }

    /// Build a Regex from this executor that can match arbitrary bytes.
    pub fn into_byte_regex(self) -> re_bytes::Regex {
        re_bytes::Regex::from(self)
    }

    /// Build a RegexSet from this executor that can match arbitrary bytes.
    pub fn into_byte_regex_set(self) -> re_set::bytes::RegexSet {
        re_set::bytes::RegexSet::from(self)
    }

    /// The original regular expressions given by the caller that were
    /// compiled.
    pub fn regex_strings(&self) -> &[String] {
        &self.ro.res
    }

    /// Return a slice of capture names.
    ///
    /// Any capture that isn't named is None.
    pub fn capture_names(&self) -> &[Option<String>] {
        &self.ro.nfa.captures
    }

    /// Return a reference to named groups mapping (from group name to
    /// group position).
    pub fn capture_name_idx(&self) -> &Arc<HashMap<String, usize>> {
        &self.ro.nfa.capture_name_idx
    }
}

impl Clone for Exec {
    fn clone(&self) -> Exec {
        let pool = ExecReadOnly::new_pool(&self.ro);
        Exec { ro: self.ro.clone(), pool }
    }
}

impl ExecReadOnly {
    fn choose_match_type(&self, hint: Option<MatchType>) -> MatchType {
        if let Some(MatchType::Nfa(_)) = hint {
            return hint.unwrap();
        }
        // If the NFA is empty, then we'll never match anything.
        if self.nfa.insts.is_empty() {
            return MatchType::Nothing;
        }
        if let Some(literalty) = self.choose_literal_match_type() {
            return literalty;
        }
        if let Some(dfaty) = self.choose_dfa_match_type() {
            return dfaty;
        }
        // We're so totally hosed.
        MatchType::Nfa(MatchNfaType::Auto)
    }

    /// If a plain literal scan can be used, then a corresponding literal
    /// search type is returned.
    fn choose_literal_match_type(&self) -> Option<MatchType> {
        #[cfg(not(feature = "perf-literal"))]
        fn imp(_: &ExecReadOnly) -> Option<MatchType> {
            None
        }

        #[cfg(feature = "perf-literal")]
        fn imp(ro: &ExecReadOnly) -> Option<MatchType> {
            // If our set of prefixes is complete, then we can use it to find
            // a match in lieu of a regex engine. This doesn't quite work well
            // in the presence of multiple regexes, so only do it when there's
            // one.
            //
            // TODO(burntsushi): Also, don't try to match literals if the regex
            // is partially anchored. We could technically do it, but we'd need
            // to create two sets of literals: all of them and then the subset
            // that aren't anchored. We would then only search for all of them
            // when at the beginning of the input and use the subset in all
            // other cases.
            if ro.res.len() != 1 {
                return None;
            }
            if ro.ac.is_some() {
                return Some(MatchType::Literal(
                    MatchLiteralType::AhoCorasick,
                ));
            }
            if ro.nfa.prefixes.complete() {
                return if ro.nfa.is_anchored_start {
                    Some(MatchType::Literal(MatchLiteralType::AnchoredStart))
                } else {
                    Some(MatchType::Literal(MatchLiteralType::Unanchored))
                };
            }
            if ro.suffixes.complete() {
                return if ro.nfa.is_anchored_end {
                    Some(MatchType::Literal(MatchLiteralType::AnchoredEnd))
                } else {
                    // This case shouldn't happen. When the regex isn't
                    // anchored, then complete prefixes should imply complete
                    // suffixes.
                    Some(MatchType::Literal(MatchLiteralType::Unanchored))
                };
            }
            None
        }

        imp(self)
    }

    /// If a DFA scan can be used, then choose the appropriate DFA strategy.
    fn choose_dfa_match_type(&self) -> Option<MatchType> {
        #[cfg(not(feature = "perf-dfa"))]
        fn imp(_: &ExecReadOnly) -> Option<MatchType> {
            None
        }

        #[cfg(feature = "perf-dfa")]
        fn imp(ro: &ExecReadOnly) -> Option<MatchType> {
            if !dfa::can_exec(&ro.dfa) {
                return None;
            }
            // Regex sets require a slightly specialized path.
            if ro.res.len() >= 2 {
                return Some(MatchType::DfaMany);
            }
            // If the regex is anchored at the end but not the start, then
            // just match in reverse from the end of the haystack.
            if !ro.nfa.is_anchored_start && ro.nfa.is_anchored_end {
                return Some(MatchType::DfaAnchoredReverse);
            }
            #[cfg(feature = "perf-literal")]
            {
                // If there's a longish suffix literal, then it might be faster
                // to look for that first.
                if ro.should_suffix_scan() {
                    return Some(MatchType::DfaSuffix);
                }
            }
            // Fall back to your garden variety forward searching lazy DFA.
            Some(MatchType::Dfa)
        }

        imp(self)
    }

    /// Returns true if the program is amenable to suffix scanning.
    ///
    /// When this is true, as a heuristic, we assume it is OK to quickly scan
    /// for suffix literals and then do a *reverse* DFA match from any matches
    /// produced by the literal scan. (And then followed by a forward DFA
    /// search, since the previously found suffix literal maybe not actually be
    /// the end of a match.)
    ///
    /// This is a bit of a specialized optimization, but can result in pretty
    /// big performance wins if 1) there are no prefix literals and 2) the
    /// suffix literals are pretty rare in the text. (1) is obviously easy to
    /// account for but (2) is harder. As a proxy, we assume that longer
    /// strings are generally rarer, so we only enable this optimization when
    /// we have a meaty suffix.
    #[cfg(all(feature = "perf-dfa", feature = "perf-literal"))]
    fn should_suffix_scan(&self) -> bool {
        if self.suffixes.is_empty() {
            return false;
        }
        let lcs_len = self.suffixes.lcs().char_len();
        lcs_len >= 3 && lcs_len > self.dfa.prefixes.lcp().char_len()
    }

    fn new_pool(ro: &Arc<ExecReadOnly>) -> Box<Pool<ProgramCache>> {
        let ro = ro.clone();
        Box::new(Pool::new(Box::new(move || {
            AssertUnwindSafe(RefCell::new(ProgramCacheInner::new(&ro)))
        })))
    }
}

#[derive(Clone, Copy, Debug)]
enum MatchType {
    /// A single or multiple literal search. This is only used when the regex
    /// can be decomposed into a literal search.
    #[cfg(feature = "perf-literal")]
    Literal(MatchLiteralType),
    /// A normal DFA search.
    #[cfg(feature = "perf-dfa")]
    Dfa,
    /// A reverse DFA search starting from the end of a haystack.
    #[cfg(feature = "perf-dfa")]
    DfaAnchoredReverse,
    /// A reverse DFA search with suffix literal scanning.
    #[cfg(all(feature = "perf-dfa", feature = "perf-literal"))]
    DfaSuffix,
    /// Use the DFA on two or more regular expressions.
    #[cfg(feature = "perf-dfa")]
    DfaMany,
    /// An NFA variant.
    Nfa(MatchNfaType),
    /// No match is ever possible, so don't ever try to search.
    Nothing,
}

#[derive(Clone, Copy, Debug)]
#[cfg(feature = "perf-literal")]
enum MatchLiteralType {
    /// Match literals anywhere in text.
    Unanchored,
    /// Match literals only at the start of text.
    AnchoredStart,
    /// Match literals only at the end of text.
    AnchoredEnd,
    /// Use an Aho-Corasick automaton. This requires `ac` to be Some on
    /// ExecReadOnly.
    AhoCorasick,
}

#[derive(Clone, Copy, Debug, Eq, PartialEq)]
enum MatchNfaType {
    /// Choose between Backtrack and PikeVM.
    Auto,
    /// NFA bounded backtracking.
    ///
    /// (This is only set by tests, since it never makes sense to always want
    /// backtracking.)
    Backtrack,
    /// The Pike VM.
    ///
    /// (This is only set by tests, since it never makes sense to always want
    /// the Pike VM.)
    PikeVM,
}

/// `ProgramCache` maintains reusable allocations for each matching engine
/// available to a particular program.
///
/// We declare this as unwind safe since it's a cache that's only used for
/// performance purposes. If a panic occurs, it is (or should be) always safe
/// to continue using the same regex object.
pub type ProgramCache = AssertUnwindSafe<RefCell<ProgramCacheInner>>;

#[derive(Debug)]
pub struct ProgramCacheInner {
    pub pikevm: pikevm::Cache,
    pub backtrack: backtrack::Cache,
    #[cfg(feature = "perf-dfa")]
    pub dfa: dfa::Cache,
    #[cfg(feature = "perf-dfa")]
    pub dfa_reverse: dfa::Cache,
}

impl ProgramCacheInner {
    fn new(ro: &ExecReadOnly) -> Self {
        ProgramCacheInner {
            pikevm: pikevm::Cache::new(&ro.nfa),
            backtrack: backtrack::Cache::new(&ro.nfa),
            #[cfg(feature = "perf-dfa")]
            dfa: dfa::Cache::new(&ro.dfa),
            #[cfg(feature = "perf-dfa")]
            dfa_reverse: dfa::Cache::new(&ro.dfa_reverse),
        }
    }
}

/// Alternation literals checks if the given HIR is a simple alternation of
/// literals, and if so, returns them. Otherwise, this returns None.
#[cfg(feature = "perf-literal")]
fn alternation_literals(expr: &Hir) -> Option<Vec<Vec<u8>>> {
    use regex_syntax::hir::{HirKind, Literal};

    // This is pretty hacky, but basically, if `is_alternation_literal` is
    // true, then we can make several assumptions about the structure of our
    // HIR. This is what justifies the `unreachable!` statements below.
    //
    // This code should be refactored once we overhaul this crate's
    // optimization pipeline, because this is a terribly inflexible way to go
    // about things.

    if !expr.is_alternation_literal() {
        return None;
    }
    let alts = match *expr.kind() {
        HirKind::Alternation(ref alts) => alts,
        _ => return None, // one literal isn't worth it
    };

    let extendlit = |lit: &Literal, dst: &mut Vec<u8>| match *lit {
        Literal::Unicode(c) => {
            let mut buf = [0; 4];
            dst.extend_from_slice(c.encode_utf8(&mut buf).as_bytes());
        }
        Literal::Byte(b) => {
            dst.push(b);
        }
    };

    let mut lits = vec![];
    for alt in alts {
        let mut lit = vec![];
        match *alt.kind() {
            HirKind::Literal(ref x) => extendlit(x, &mut lit),
            HirKind::Concat(ref exprs) => {
                for e in exprs {
                    match *e.kind() {
                        HirKind::Literal(ref x) => extendlit(x, &mut lit),
                        _ => unreachable!("expected literal, got {:?}", e),
                    }
                }
            }
            _ => unreachable!("expected literal or concat, got {:?}", alt),
        }
        lits.push(lit);
    }
    Some(lits)
}

#[cfg(test)]
mod test {
    #[test]
    fn uppercut_s_backtracking_bytes_default_bytes_mismatch() {
        use crate::internal::ExecBuilder;

        let backtrack_bytes_re = ExecBuilder::new("^S")
            .bounded_backtracking()
            .only_utf8(false)
            .build()
            .map(|exec| exec.into_byte_regex())
            .map_err(|err| format!("{}", err))
            .unwrap();

        let default_bytes_re = ExecBuilder::new("^S")
            .only_utf8(false)
            .build()
            .map(|exec| exec.into_byte_regex())
            .map_err(|err| format!("{}", err))
            .unwrap();

        let input = vec![83, 83];

        let s1 = backtrack_bytes_re.split(&input);
        let s2 = default_bytes_re.split(&input);
        for (chunk1, chunk2) in s1.zip(s2) {
            assert_eq!(chunk1, chunk2);
        }
    }

    #[test]
    fn unicode_lit_star_backtracking_utf8bytes_default_utf8bytes_mismatch() {
        use crate::internal::ExecBuilder;

        let backtrack_bytes_re = ExecBuilder::new(r"^(?u:\*)")
            .bounded_backtracking()
            .bytes(true)
            .build()
            .map(|exec| exec.into_regex())
            .map_err(|err| format!("{}", err))
            .unwrap();

        let default_bytes_re = ExecBuilder::new(r"^(?u:\*)")
            .bytes(true)
            .build()
            .map(|exec| exec.into_regex())
            .map_err(|err| format!("{}", err))
            .unwrap();

        let input = "**";

        let s1 = backtrack_bytes_re.split(input);
        let s2 = default_bytes_re.split(input);
        for (chunk1, chunk2) in s1.zip(s2) {
            assert_eq!(chunk1, chunk2);
        }
    }
}