pub struct Literal { /* private fields */ }
Expand description

A single member of a set of literals extracted from a regular expression.

This type has Deref and DerefMut impls to Vec<u8> so that all slice and Vec operations are available.

Implementations

Returns a new complete literal with the bytes given.

Returns a new complete empty literal.

Returns true if this literal was “cut.”

Cuts this literal.

Methods from Deref<Target = Vec<u8>>

Returns the number of elements the vector can hold without reallocating.

Examples
let vec: Vec<i32> = Vec::with_capacity(10);
assert_eq!(vec.capacity(), 10);

Reserves capacity for at least additional more elements to be inserted in the given Vec<T>. The collection may reserve more space to avoid frequent reallocations. After calling reserve, capacity will be greater than or equal to self.len() + additional. Does nothing if capacity is already sufficient.

Panics

Panics if the new capacity exceeds isize::MAX bytes.

Examples
let mut vec = vec![1];
vec.reserve(10);
assert!(vec.capacity() >= 11);

Reserves the minimum capacity for exactly additional more elements to be inserted in the given Vec<T>. After calling reserve_exact, capacity will be greater than or equal to self.len() + additional. Does nothing if the capacity is already sufficient.

Note that the allocator may give the collection more space than it requests. Therefore, capacity can not be relied upon to be precisely minimal. Prefer reserve if future insertions are expected.

Panics

Panics if the new capacity exceeds isize::MAX bytes.

Examples
let mut vec = vec![1];
vec.reserve_exact(10);
assert!(vec.capacity() >= 11);

Tries to reserve capacity for at least additional more elements to be inserted in the given Vec<T>. The collection may reserve more space to avoid frequent reallocations. After calling try_reserve, capacity will be greater than or equal to self.len() + additional. Does nothing if capacity is already sufficient.

Errors

If the capacity overflows, or the allocator reports a failure, then an error is returned.

Examples
use std::collections::TryReserveError;

fn process_data(data: &[u32]) -> Result<Vec<u32>, TryReserveError> {
    let mut output = Vec::new();

    // Pre-reserve the memory, exiting if we can't
    output.try_reserve(data.len())?;

    // Now we know this can't OOM in the middle of our complex work
    output.extend(data.iter().map(|&val| {
        val * 2 + 5 // very complicated
    }));

    Ok(output)
}

Tries to reserve the minimum capacity for exactly additional elements to be inserted in the given Vec<T>. After calling try_reserve_exact, capacity will be greater than or equal to self.len() + additional if it returns Ok(()). Does nothing if the capacity is already sufficient.

Note that the allocator may give the collection more space than it requests. Therefore, capacity can not be relied upon to be precisely minimal. Prefer try_reserve if future insertions are expected.

Errors

If the capacity overflows, or the allocator reports a failure, then an error is returned.

Examples
use std::collections::TryReserveError;

fn process_data(data: &[u32]) -> Result<Vec<u32>, TryReserveError> {
    let mut output = Vec::new();

    // Pre-reserve the memory, exiting if we can't
    output.try_reserve_exact(data.len())?;

    // Now we know this can't OOM in the middle of our complex work
    output.extend(data.iter().map(|&val| {
        val * 2 + 5 // very complicated
    }));

    Ok(output)
}

Shrinks the capacity of the vector as much as possible.

It will drop down as close as possible to the length but the allocator may still inform the vector that there is space for a few more elements.

Examples
let mut vec = Vec::with_capacity(10);
vec.extend([1, 2, 3]);
assert_eq!(vec.capacity(), 10);
vec.shrink_to_fit();
assert!(vec.capacity() >= 3);

Shrinks the capacity of the vector with a lower bound.

The capacity will remain at least as large as both the length and the supplied value.

If the current capacity is less than the lower limit, this is a no-op.

Examples
let mut vec = Vec::with_capacity(10);
vec.extend([1, 2, 3]);
assert_eq!(vec.capacity(), 10);
vec.shrink_to(4);
assert!(vec.capacity() >= 4);
vec.shrink_to(0);
assert!(vec.capacity() >= 3);

Shortens the vector, keeping the first len elements and dropping the rest.

If len is greater than the vector’s current length, this has no effect.

The drain method can emulate truncate, but causes the excess elements to be returned instead of dropped.

Note that this method has no effect on the allocated capacity of the vector.

Examples

Truncating a five element vector to two elements:

let mut vec = vec![1, 2, 3, 4, 5];
vec.truncate(2);
assert_eq!(vec, [1, 2]);

No truncation occurs when len is greater than the vector’s current length:

let mut vec = vec![1, 2, 3];
vec.truncate(8);
assert_eq!(vec, [1, 2, 3]);

Truncating when len == 0 is equivalent to calling the clear method.

let mut vec = vec![1, 2, 3];
vec.truncate(0);
assert_eq!(vec, []);

Extracts a slice containing the entire vector.

Equivalent to &s[..].

Examples
use std::io::{self, Write};
let buffer = vec![1, 2, 3, 5, 8];
io::sink().write(buffer.as_slice()).unwrap();

Extracts a mutable slice of the entire vector.

Equivalent to &mut s[..].

Examples
use std::io::{self, Read};
let mut buffer = vec![0; 3];
io::repeat(0b101).read_exact(buffer.as_mut_slice()).unwrap();

Returns a raw pointer to the vector’s buffer.

The caller must ensure that the vector outlives the pointer this function returns, or else it will end up pointing to garbage. Modifying the vector may cause its buffer to be reallocated, which would also make any pointers to it invalid.

The caller must also ensure that the memory the pointer (non-transitively) points to is never written to (except inside an UnsafeCell) using this pointer or any pointer derived from it. If you need to mutate the contents of the slice, use as_mut_ptr.

Examples
let x = vec![1, 2, 4];
let x_ptr = x.as_ptr();

unsafe {
    for i in 0..x.len() {
        assert_eq!(*x_ptr.add(i), 1 << i);
    }
}

Returns an unsafe mutable pointer to the vector’s buffer.

The caller must ensure that the vector outlives the pointer this function returns, or else it will end up pointing to garbage. Modifying the vector may cause its buffer to be reallocated, which would also make any pointers to it invalid.

Examples
// Allocate vector big enough for 4 elements.
let size = 4;
let mut x: Vec<i32> = Vec::with_capacity(size);
let x_ptr = x.as_mut_ptr();

// Initialize elements via raw pointer writes, then set length.
unsafe {
    for i in 0..size {
        *x_ptr.add(i) = i as i32;
    }
    x.set_len(size);
}
assert_eq!(&*x, &[0, 1, 2, 3]);
🔬 This is a nightly-only experimental API. (allocator_api)

Returns a reference to the underlying allocator.

Forces the length of the vector to new_len.

This is a low-level operation that maintains none of the normal invariants of the type. Normally changing the length of a vector is done using one of the safe operations instead, such as truncate, resize, extend, or clear.

Safety
  • new_len must be less than or equal to capacity().
  • The elements at old_len..new_len must be initialized.
Examples

This method can be useful for situations in which the vector is serving as a buffer for other code, particularly over FFI:

pub fn get_dictionary(&self) -> Option<Vec<u8>> {
    // Per the FFI method's docs, "32768 bytes is always enough".
    let mut dict = Vec::with_capacity(32_768);
    let mut dict_length = 0;
    // SAFETY: When `deflateGetDictionary` returns `Z_OK`, it holds that:
    // 1. `dict_length` elements were initialized.
    // 2. `dict_length` <= the capacity (32_768)
    // which makes `set_len` safe to call.
    unsafe {
        // Make the FFI call...
        let r = deflateGetDictionary(self.strm, dict.as_mut_ptr(), &mut dict_length);
        if r == Z_OK {
            // ...and update the length to what was initialized.
            dict.set_len(dict_length);
            Some(dict)
        } else {
            None
        }
    }
}

While the following example is sound, there is a memory leak since the inner vectors were not freed prior to the set_len call:

let mut vec = vec![vec![1, 0, 0],
                   vec![0, 1, 0],
                   vec![0, 0, 1]];
// SAFETY:
// 1. `old_len..0` is empty so no elements need to be initialized.
// 2. `0 <= capacity` always holds whatever `capacity` is.
unsafe {
    vec.set_len(0);
}

Normally, here, one would use clear instead to correctly drop the contents and thus not leak memory.

Removes an element from the vector and returns it.

The removed element is replaced by the last element of the vector.

This does not preserve ordering, but is O(1). If you need to preserve the element order, use remove instead.

Panics

Panics if index is out of bounds.

Examples
let mut v = vec!["foo", "bar", "baz", "qux"];

assert_eq!(v.swap_remove(1), "bar");
assert_eq!(v, ["foo", "qux", "baz"]);

assert_eq!(v.swap_remove(0), "foo");
assert_eq!(v, ["baz", "qux"]);

Inserts an element at position index within the vector, shifting all elements after it to the right.

Panics

Panics if index > len.

Examples
let mut vec = vec![1, 2, 3];
vec.insert(1, 4);
assert_eq!(vec, [1, 4, 2, 3]);
vec.insert(4, 5);
assert_eq!(vec, [1, 4, 2, 3, 5]);

Removes and returns the element at position index within the vector, shifting all elements after it to the left.

Note: Because this shifts over the remaining elements, it has a worst-case performance of O(n). If you don’t need the order of elements to be preserved, use swap_remove instead. If you’d like to remove elements from the beginning of the Vec, consider using VecDeque::pop_front instead.

Panics

Panics if index is out of bounds.

Examples
let mut v = vec![1, 2, 3];
assert_eq!(v.remove(1), 2);
assert_eq!(v, [1, 3]);

Retains only the elements specified by the predicate.

In other words, remove all elements e for which f(&e) returns false. This method operates in place, visiting each element exactly once in the original order, and preserves the order of the retained elements.

Examples
let mut vec = vec![1, 2, 3, 4];
vec.retain(|&x| x % 2 == 0);
assert_eq!(vec, [2, 4]);

Because the elements are visited exactly once in the original order, external state may be used to decide which elements to keep.

let mut vec = vec![1, 2, 3, 4, 5];
let keep = [false, true, true, false, true];
let mut iter = keep.iter();
vec.retain(|_| *iter.next().unwrap());
assert_eq!(vec, [2, 3, 5]);

Retains only the elements specified by the predicate, passing a mutable reference to it.

In other words, remove all elements e such that f(&mut e) returns false. This method operates in place, visiting each element exactly once in the original order, and preserves the order of the retained elements.

Examples
let mut vec = vec![1, 2, 3, 4];
vec.retain_mut(|x| if *x > 3 {
    false
} else {
    *x += 1;
    true
});
assert_eq!(vec, [2, 3, 4]);

Removes all but the first of consecutive elements in the vector that resolve to the same key.

If the vector is sorted, this removes all duplicates.

Examples
let mut vec = vec![10, 20, 21, 30, 20];

vec.dedup_by_key(|i| *i / 10);

assert_eq!(vec, [10, 20, 30, 20]);

Removes all but the first of consecutive elements in the vector satisfying a given equality relation.

The same_bucket function is passed references to two elements from the vector and must determine if the elements compare equal. The elements are passed in opposite order from their order in the slice, so if same_bucket(a, b) returns true, a is removed.

If the vector is sorted, this removes all duplicates.

Examples
let mut vec = vec!["foo", "bar", "Bar", "baz", "bar"];

vec.dedup_by(|a, b| a.eq_ignore_ascii_case(b));

assert_eq!(vec, ["foo", "bar", "baz", "bar"]);

Appends an element to the back of a collection.

Panics

Panics if the new capacity exceeds isize::MAX bytes.

Examples
let mut vec = vec![1, 2];
vec.push(3);
assert_eq!(vec, [1, 2, 3]);

Removes the last element from a vector and returns it, or None if it is empty.

If you’d like to pop the first element, consider using VecDeque::pop_front instead.

Examples
let mut vec = vec![1, 2, 3];
assert_eq!(vec.pop(), Some(3));
assert_eq!(vec, [1, 2]);

Moves all the elements of other into self, leaving other empty.

Panics

Panics if the number of elements in the vector overflows a usize.

Examples
let mut vec = vec![1, 2, 3];
let mut vec2 = vec![4, 5, 6];
vec.append(&mut vec2);
assert_eq!(vec, [1, 2, 3, 4, 5, 6]);
assert_eq!(vec2, []);

Removes the specified range from the vector in bulk, returning all removed elements as an iterator. If the iterator is dropped before being fully consumed, it drops the remaining removed elements.

The returned iterator keeps a mutable borrow on the vector to optimize its implementation.

Panics

Panics if the starting point is greater than the end point or if the end point is greater than the length of the vector.

Leaking

If the returned iterator goes out of scope without being dropped (due to mem::forget, for example), the vector may have lost and leaked elements arbitrarily, including elements outside the range.

Examples
let mut v = vec![1, 2, 3];
let u: Vec<_> = v.drain(1..).collect();
assert_eq!(v, &[1]);
assert_eq!(u, &[2, 3]);

// A full range clears the vector, like `clear()` does
v.drain(..);
assert_eq!(v, &[]);

Clears the vector, removing all values.

Note that this method has no effect on the allocated capacity of the vector.

Examples
let mut v = vec![1, 2, 3];

v.clear();

assert!(v.is_empty());

Returns the number of elements in the vector, also referred to as its ‘length’.

Examples
let a = vec![1, 2, 3];
assert_eq!(a.len(), 3);

Returns true if the vector contains no elements.

Examples
let mut v = Vec::new();
assert!(v.is_empty());

v.push(1);
assert!(!v.is_empty());

Splits the collection into two at the given index.

Returns a newly allocated vector containing the elements in the range [at, len). After the call, the original vector will be left containing the elements [0, at) with its previous capacity unchanged.

Panics

Panics if at > len.

Examples
let mut vec = vec![1, 2, 3];
let vec2 = vec.split_off(1);
assert_eq!(vec, [1]);
assert_eq!(vec2, [2, 3]);

Resizes the Vec in-place so that len is equal to new_len.

If new_len is greater than len, the Vec is extended by the difference, with each additional slot filled with the result of calling the closure f. The return values from f will end up in the Vec in the order they have been generated.

If new_len is less than len, the Vec is simply truncated.

This method uses a closure to create new values on every push. If you’d rather Clone a given value, use Vec::resize. If you want to use the Default trait to generate values, you can pass Default::default as the second argument.

Examples
let mut vec = vec![1, 2, 3];
vec.resize_with(5, Default::default);
assert_eq!(vec, [1, 2, 3, 0, 0]);

let mut vec = vec![];
let mut p = 1;
vec.resize_with(4, || { p *= 2; p });
assert_eq!(vec, [2, 4, 8, 16]);

Returns the remaining spare capacity of the vector as a slice of MaybeUninit<T>.

The returned slice can be used to fill the vector with data (e.g. by reading from a file) before marking the data as initialized using the set_len method.

Examples
// Allocate vector big enough for 10 elements.
let mut v = Vec::with_capacity(10);

// Fill in the first 3 elements.
let uninit = v.spare_capacity_mut();
uninit[0].write(0);
uninit[1].write(1);
uninit[2].write(2);

// Mark the first 3 elements of the vector as being initialized.
unsafe {
    v.set_len(3);
}

assert_eq!(&v, &[0, 1, 2]);
🔬 This is a nightly-only experimental API. (vec_split_at_spare)

Returns vector content as a slice of T, along with the remaining spare capacity of the vector as a slice of MaybeUninit<T>.

The returned spare capacity slice can be used to fill the vector with data (e.g. by reading from a file) before marking the data as initialized using the set_len method.

Note that this is a low-level API, which should be used with care for optimization purposes. If you need to append data to a Vec you can use push, extend, extend_from_slice, extend_from_within, insert, append, resize or resize_with, depending on your exact needs.

Examples
#![feature(vec_split_at_spare)]

let mut v = vec![1, 1, 2];

// Reserve additional space big enough for 10 elements.
v.reserve(10);

let (init, uninit) = v.split_at_spare_mut();
let sum = init.iter().copied().sum::<u32>();

// Fill in the next 4 elements.
uninit[0].write(sum);
uninit[1].write(sum * 2);
uninit[2].write(sum * 3);
uninit[3].write(sum * 4);

// Mark the 4 elements of the vector as being initialized.
unsafe {
    let len = v.len();
    v.set_len(len + 4);
}

assert_eq!(&v, &[1, 1, 2, 4, 8, 12, 16]);

Resizes the Vec in-place so that len is equal to new_len.

If new_len is greater than len, the Vec is extended by the difference, with each additional slot filled with value. If new_len is less than len, the Vec is simply truncated.

This method requires T to implement Clone, in order to be able to clone the passed value. If you need more flexibility (or want to rely on Default instead of Clone), use Vec::resize_with. If you only need to resize to a smaller size, use Vec::truncate.

Examples
let mut vec = vec!["hello"];
vec.resize(3, "world");
assert_eq!(vec, ["hello", "world", "world"]);

let mut vec = vec![1, 2, 3, 4];
vec.resize(2, 0);
assert_eq!(vec, [1, 2]);

Clones and appends all elements in a slice to the Vec.

Iterates over the slice other, clones each element, and then appends it to this Vec. The other slice is traversed in-order.

Note that this function is same as extend except that it is specialized to work with slices instead. If and when Rust gets specialization this function will likely be deprecated (but still available).

Examples
let mut vec = vec![1];
vec.extend_from_slice(&[2, 3, 4]);
assert_eq!(vec, [1, 2, 3, 4]);

Copies elements from src range to the end of the vector.

Panics

Panics if the starting point is greater than the end point or if the end point is greater than the length of the vector.

Examples
let mut vec = vec![0, 1, 2, 3, 4];

vec.extend_from_within(2..);
assert_eq!(vec, [0, 1, 2, 3, 4, 2, 3, 4]);

vec.extend_from_within(..2);
assert_eq!(vec, [0, 1, 2, 3, 4, 2, 3, 4, 0, 1]);

vec.extend_from_within(4..8);
assert_eq!(vec, [0, 1, 2, 3, 4, 2, 3, 4, 0, 1, 4, 2, 3, 4]);

Removes consecutive repeated elements in the vector according to the PartialEq trait implementation.

If the vector is sorted, this removes all duplicates.

Examples
let mut vec = vec![1, 2, 2, 3, 2];

vec.dedup();

assert_eq!(vec, [1, 2, 3, 2]);

Creates a splicing iterator that replaces the specified range in the vector with the given replace_with iterator and yields the removed items. replace_with does not need to be the same length as range.

range is removed even if the iterator is not consumed until the end.

It is unspecified how many elements are removed from the vector if the Splice value is leaked.

The input iterator replace_with is only consumed when the Splice value is dropped.

This is optimal if:

  • The tail (elements in the vector after range) is empty,
  • or replace_with yields fewer or equal elements than range’s length
  • or the lower bound of its size_hint() is exact.

Otherwise, a temporary vector is allocated and the tail is moved twice.

Panics

Panics if the starting point is greater than the end point or if the end point is greater than the length of the vector.

Examples
let mut v = vec![1, 2, 3, 4];
let new = [7, 8, 9];
let u: Vec<_> = v.splice(1..3, new).collect();
assert_eq!(v, &[1, 7, 8, 9, 4]);
assert_eq!(u, &[2, 3]);
🔬 This is a nightly-only experimental API. (drain_filter)

Creates an iterator which uses a closure to determine if an element should be removed.

If the closure returns true, then the element is removed and yielded. If the closure returns false, the element will remain in the vector and will not be yielded by the iterator.

Using this method is equivalent to the following code:

let mut i = 0;
while i < vec.len() {
    if some_predicate(&mut vec[i]) {
        let val = vec.remove(i);
        // your code here
    } else {
        i += 1;
    }
}

But drain_filter is easier to use. drain_filter is also more efficient, because it can backshift the elements of the array in bulk.

Note that drain_filter also lets you mutate every element in the filter closure, regardless of whether you choose to keep or remove it.

Examples

Splitting an array into evens and odds, reusing the original allocation:

#![feature(drain_filter)]
let mut numbers = vec![1, 2, 3, 4, 5, 6, 8, 9, 11, 13, 14, 15];

let evens = numbers.drain_filter(|x| *x % 2 == 0).collect::<Vec<_>>();
let odds = numbers;

assert_eq!(evens, vec![2, 4, 6, 8, 14]);
assert_eq!(odds, vec![1, 3, 5, 9, 11, 13, 15]);

Methods from Deref<Target = [T]>

Returns the number of elements in the slice.

Examples
let a = [1, 2, 3];
assert_eq!(a.len(), 3);

Returns true if the slice has a length of 0.

Examples
let a = [1, 2, 3];
assert!(!a.is_empty());

Returns the first element of the slice, or None if it is empty.

Examples
let v = [10, 40, 30];
assert_eq!(Some(&10), v.first());

let w: &[i32] = &[];
assert_eq!(None, w.first());

Returns the first and all the rest of the elements of the slice, or None if it is empty.

Examples
let x = &[0, 1, 2];

if let Some((first, elements)) = x.split_first() {
    assert_eq!(first, &0);
    assert_eq!(elements, &[1, 2]);
}

Returns the last and all the rest of the elements of the slice, or None if it is empty.

Examples
let x = &[0, 1, 2];

if let Some((last, elements)) = x.split_last() {
    assert_eq!(last, &2);
    assert_eq!(elements, &[0, 1]);
}

Returns the last element of the slice, or None if it is empty.

Examples
let v = [10, 40, 30];
assert_eq!(Some(&30), v.last());

let w: &[i32] = &[];
assert_eq!(None, w.last());

Returns a reference to an element or subslice depending on the type of index.

  • If given a position, returns a reference to the element at that position or None if out of bounds.
  • If given a range, returns the subslice corresponding to that range, or None if out of bounds.
Examples
let v = [10, 40, 30];
assert_eq!(Some(&40), v.get(1));
assert_eq!(Some(&[10, 40][..]), v.get(0..2));
assert_eq!(None, v.get(3));
assert_eq!(None, v.get(0..4));

Returns a reference to an element or subslice, without doing bounds checking.

For a safe alternative see get.

Safety

Calling this method with an out-of-bounds index is undefined behavior even if the resulting reference is not used.

Examples
let x = &[1, 2, 4];

unsafe {
    assert_eq!(x.get_unchecked(1), &2);
}

Returns a raw pointer to the slice’s buffer.

The caller must ensure that the slice outlives the pointer this function returns, or else it will end up pointing to garbage.

The caller must also ensure that the memory the pointer (non-transitively) points to is never written to (except inside an UnsafeCell) using this pointer or any pointer derived from it. If you need to mutate the contents of the slice, use as_mut_ptr.

Modifying the container referenced by this slice may cause its buffer to be reallocated, which would also make any pointers to it invalid.

Examples
let x = &[1, 2, 4];
let x_ptr = x.as_ptr();

unsafe {
    for i in 0..x.len() {
        assert_eq!(x.get_unchecked(i), &*x_ptr.add(i));
    }
}

Returns the two raw pointers spanning the slice.

The returned range is half-open, which means that the end pointer points one past the last element of the slice. This way, an empty slice is represented by two equal pointers, and the difference between the two pointers represents the size of the slice.

See as_ptr for warnings on using these pointers. The end pointer requires extra caution, as it does not point to a valid element in the slice.

This function is useful for interacting with foreign interfaces which use two pointers to refer to a range of elements in memory, as is common in C++.

It can also be useful to check if a pointer to an element refers to an element of this slice:

let a = [1, 2, 3];
let x = &a[1] as *const _;
let y = &5 as *const _;

assert!(a.as_ptr_range().contains(&x));
assert!(!a.as_ptr_range().contains(&y));

Returns an iterator over the slice.

Examples
let x = &[1, 2, 4];
let mut iterator = x.iter();

assert_eq!(iterator.next(), Some(&1));
assert_eq!(iterator.next(), Some(&2));
assert_eq!(iterator.next(), Some(&4));
assert_eq!(iterator.next(), None);

Returns an iterator over all contiguous windows of length size. The windows overlap. If the slice is shorter than size, the iterator returns no values.

Panics

Panics if size is 0.

Examples
let slice = ['r', 'u', 's', 't'];
let mut iter = slice.windows(2);
assert_eq!(iter.next().unwrap(), &['r', 'u']);
assert_eq!(iter.next().unwrap(), &['u', 's']);
assert_eq!(iter.next().unwrap(), &['s', 't']);
assert!(iter.next().is_none());

If the slice is shorter than size:

let slice = ['f', 'o', 'o'];
let mut iter = slice.windows(4);
assert!(iter.next().is_none());

Returns an iterator over chunk_size elements of the slice at a time, starting at the beginning of the slice.

The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last chunk will not have length chunk_size.

See chunks_exact for a variant of this iterator that returns chunks of always exactly chunk_size elements, and rchunks for the same iterator but starting at the end of the slice.

Panics

Panics if chunk_size is 0.

Examples
let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.chunks(2);
assert_eq!(iter.next().unwrap(), &['l', 'o']);
assert_eq!(iter.next().unwrap(), &['r', 'e']);
assert_eq!(iter.next().unwrap(), &['m']);
assert!(iter.next().is_none());

Returns an iterator over chunk_size elements of the slice at a time, starting at the beginning of the slice.

The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last up to chunk_size-1 elements will be omitted and can be retrieved from the remainder function of the iterator.

Due to each chunk having exactly chunk_size elements, the compiler can often optimize the resulting code better than in the case of chunks.

See chunks for a variant of this iterator that also returns the remainder as a smaller chunk, and rchunks_exact for the same iterator but starting at the end of the slice.

Panics

Panics if chunk_size is 0.

Examples
let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.chunks_exact(2);
assert_eq!(iter.next().unwrap(), &['l', 'o']);
assert_eq!(iter.next().unwrap(), &['r', 'e']);
assert!(iter.next().is_none());
assert_eq!(iter.remainder(), &['m']);
🔬 This is a nightly-only experimental API. (slice_as_chunks)

Splits the slice into a slice of N-element arrays, assuming that there’s no remainder.

Safety

This may only be called when

  • The slice splits exactly into N-element chunks (aka self.len() % N == 0).
  • N != 0.
Examples
#![feature(slice_as_chunks)]
let slice: &[char] = &['l', 'o', 'r', 'e', 'm', '!'];
let chunks: &[[char; 1]] =
    // SAFETY: 1-element chunks never have remainder
    unsafe { slice.as_chunks_unchecked() };
assert_eq!(chunks, &[['l'], ['o'], ['r'], ['e'], ['m'], ['!']]);
let chunks: &[[char; 3]] =
    // SAFETY: The slice length (6) is a multiple of 3
    unsafe { slice.as_chunks_unchecked() };
assert_eq!(chunks, &[['l', 'o', 'r'], ['e', 'm', '!']]);

// These would be unsound:
// let chunks: &[[_; 5]] = slice.as_chunks_unchecked() // The slice length is not a multiple of 5
// let chunks: &[[_; 0]] = slice.as_chunks_unchecked() // Zero-length chunks are never allowed
🔬 This is a nightly-only experimental API. (slice_as_chunks)

Splits the slice into a slice of N-element arrays, starting at the beginning of the slice, and a remainder slice with length strictly less than N.

Panics

Panics if N is 0. This check will most probably get changed to a compile time error before this method gets stabilized.

Examples
#![feature(slice_as_chunks)]
let slice = ['l', 'o', 'r', 'e', 'm'];
let (chunks, remainder) = slice.as_chunks();
assert_eq!(chunks, &[['l', 'o'], ['r', 'e']]);
assert_eq!(remainder, &['m']);
🔬 This is a nightly-only experimental API. (slice_as_chunks)

Splits the slice into a slice of N-element arrays, starting at the end of the slice, and a remainder slice with length strictly less than N.

Panics

Panics if N is 0. This check will most probably get changed to a compile time error before this method gets stabilized.

Examples
#![feature(slice_as_chunks)]
let slice = ['l', 'o', 'r', 'e', 'm'];
let (remainder, chunks) = slice.as_rchunks();
assert_eq!(remainder, &['l']);
assert_eq!(chunks, &[['o', 'r'], ['e', 'm']]);
🔬 This is a nightly-only experimental API. (array_chunks)

Returns an iterator over N elements of the slice at a time, starting at the beginning of the slice.

The chunks are array references and do not overlap. If N does not divide the length of the slice, then the last up to N-1 elements will be omitted and can be retrieved from the remainder function of the iterator.

This method is the const generic equivalent of chunks_exact.

Panics

Panics if N is 0. This check will most probably get changed to a compile time error before this method gets stabilized.

Examples
#![feature(array_chunks)]
let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.array_chunks();
assert_eq!(iter.next().unwrap(), &['l', 'o']);
assert_eq!(iter.next().unwrap(), &['r', 'e']);
assert!(iter.next().is_none());
assert_eq!(iter.remainder(), &['m']);
🔬 This is a nightly-only experimental API. (array_windows)

Returns an iterator over overlapping windows of N elements of a slice, starting at the beginning of the slice.

This is the const generic equivalent of windows.

If N is greater than the size of the slice, it will return no windows.

Panics

Panics if N is 0. This check will most probably get changed to a compile time error before this method gets stabilized.

Examples
#![feature(array_windows)]
let slice = [0, 1, 2, 3];
let mut iter = slice.array_windows();
assert_eq!(iter.next().unwrap(), &[0, 1]);
assert_eq!(iter.next().unwrap(), &[1, 2]);
assert_eq!(iter.next().unwrap(), &[2, 3]);
assert!(iter.next().is_none());

Returns an iterator over chunk_size elements of the slice at a time, starting at the end of the slice.

The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last chunk will not have length chunk_size.

See rchunks_exact for a variant of this iterator that returns chunks of always exactly chunk_size elements, and chunks for the same iterator but starting at the beginning of the slice.

Panics

Panics if chunk_size is 0.

Examples
let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.rchunks(2);
assert_eq!(iter.next().unwrap(), &['e', 'm']);
assert_eq!(iter.next().unwrap(), &['o', 'r']);
assert_eq!(iter.next().unwrap(), &['l']);
assert!(iter.next().is_none());

Returns an iterator over chunk_size elements of the slice at a time, starting at the end of the slice.

The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last up to chunk_size-1 elements will be omitted and can be retrieved from the remainder function of the iterator.

Due to each chunk having exactly chunk_size elements, the compiler can often optimize the resulting code better than in the case of chunks.

See rchunks for a variant of this iterator that also returns the remainder as a smaller chunk, and chunks_exact for the same iterator but starting at the beginning of the slice.

Panics

Panics if chunk_size is 0.

Examples
let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.rchunks_exact(2);
assert_eq!(iter.next().unwrap(), &['e', 'm']);
assert_eq!(iter.next().unwrap(), &['o', 'r']);
assert!(iter.next().is_none());
assert_eq!(iter.remainder(), &['l']);
🔬 This is a nightly-only experimental API. (slice_group_by)

Returns an iterator over the slice producing non-overlapping runs of elements using the predicate to separate them.

The predicate is called on two elements following themselves, it means the predicate is called on slice[0] and slice[1] then on slice[1] and slice[2] and so on.

Examples
#![feature(slice_group_by)]

let slice = &[1, 1, 1, 3, 3, 2, 2, 2];

let mut iter = slice.group_by(|a, b| a == b);

assert_eq!(iter.next(), Some(&[1, 1, 1][..]));
assert_eq!(iter.next(), Some(&[3, 3][..]));
assert_eq!(iter.next(), Some(&[2, 2, 2][..]));
assert_eq!(iter.next(), None);

This method can be used to extract the sorted subslices:

#![feature(slice_group_by)]

let slice = &[1, 1, 2, 3, 2, 3, 2, 3, 4];

let mut iter = slice.group_by(|a, b| a <= b);

assert_eq!(iter.next(), Some(&[1, 1, 2, 3][..]));
assert_eq!(iter.next(), Some(&[2, 3][..]));
assert_eq!(iter.next(), Some(&[2, 3, 4][..]));
assert_eq!(iter.next(), None);

Divides one slice into two at an index.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

Panics

Panics if mid > len.

Examples
let v = [1, 2, 3, 4, 5, 6];

{
   let (left, right) = v.split_at(0);
   assert_eq!(left, []);
   assert_eq!(right, [1, 2, 3, 4, 5, 6]);
}

{
    let (left, right) = v.split_at(2);
    assert_eq!(left, [1, 2]);
    assert_eq!(right, [3, 4, 5, 6]);
}

{
    let (left, right) = v.split_at(6);
    assert_eq!(left, [1, 2, 3, 4, 5, 6]);
    assert_eq!(right, []);
}
🔬 This is a nightly-only experimental API. (slice_split_at_unchecked)

Divides one slice into two at an index, without doing bounds checking.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

For a safe alternative see split_at.

Safety

Calling this method with an out-of-bounds index is undefined behavior even if the resulting reference is not used. The caller has to ensure that 0 <= mid <= self.len().

Examples
#![feature(slice_split_at_unchecked)]

let v = [1, 2, 3, 4, 5, 6];

unsafe {
   let (left, right) = v.split_at_unchecked(0);
   assert_eq!(left, []);
   assert_eq!(right, [1, 2, 3, 4, 5, 6]);
}

unsafe {
    let (left, right) = v.split_at_unchecked(2);
    assert_eq!(left, [1, 2]);
    assert_eq!(right, [3, 4, 5, 6]);
}

unsafe {
    let (left, right) = v.split_at_unchecked(6);
    assert_eq!(left, [1, 2, 3, 4, 5, 6]);
    assert_eq!(right, []);
}
🔬 This is a nightly-only experimental API. (split_array)

Divides one slice into an array and a remainder slice at an index.

The array will contain all indices from [0, N) (excluding the index N itself) and the slice will contain all indices from [N, len) (excluding the index len itself).

Panics

Panics if N > len.

Examples
#![feature(split_array)]

let v = &[1, 2, 3, 4, 5, 6][..];

{
   let (left, right) = v.split_array_ref::<0>();
   assert_eq!(left, &[]);
   assert_eq!(right, [1, 2, 3, 4, 5, 6]);
}

{
    let (left, right) = v.split_array_ref::<2>();
    assert_eq!(left, &[1, 2]);
    assert_eq!(right, [3, 4, 5, 6]);
}

{
    let (left, right) = v.split_array_ref::<6>();
    assert_eq!(left, &[1, 2, 3, 4, 5, 6]);
    assert_eq!(right, []);
}
🔬 This is a nightly-only experimental API. (split_array)

Divides one slice into an array and a remainder slice at an index from the end.

The slice will contain all indices from [0, len - N) (excluding the index len - N itself) and the array will contain all indices from [len - N, len) (excluding the index len itself).

Panics

Panics if N > len.

Examples
#![feature(split_array)]

let v = &[1, 2, 3, 4, 5, 6][..];

{
   let (left, right) = v.rsplit_array_ref::<0>();
   assert_eq!(left, [1, 2, 3, 4, 5, 6]);
   assert_eq!(right, &[]);
}

{
    let (left, right) = v.rsplit_array_ref::<2>();
    assert_eq!(left, [1, 2, 3, 4]);
    assert_eq!(right, &[5, 6]);
}

{
    let (left, right) = v.rsplit_array_ref::<6>();
    assert_eq!(left, []);
    assert_eq!(right, &[1, 2, 3, 4, 5, 6]);
}

Returns an iterator over subslices separated by elements that match pred. The matched element is not contained in the subslices.

Examples
let slice = [10, 40, 33, 20];
let mut iter = slice.split(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10, 40]);
assert_eq!(iter.next().unwrap(), &[20]);
assert!(iter.next().is_none());

If the first element is matched, an empty slice will be the first item returned by the iterator. Similarly, if the last element in the slice is matched, an empty slice will be the last item returned by the iterator:

let slice = [10, 40, 33];
let mut iter = slice.split(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10, 40]);
assert_eq!(iter.next().unwrap(), &[]);
assert!(iter.next().is_none());

If two matched elements are directly adjacent, an empty slice will be present between them:

let slice = [10, 6, 33, 20];
let mut iter = slice.split(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10]);
assert_eq!(iter.next().unwrap(), &[]);
assert_eq!(iter.next().unwrap(), &[20]);
assert!(iter.next().is_none());

Returns an iterator over subslices separated by elements that match pred. The matched element is contained in the end of the previous subslice as a terminator.

Examples
let slice = [10, 40, 33, 20];
let mut iter = slice.split_inclusive(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10, 40, 33]);
assert_eq!(iter.next().unwrap(), &[20]);
assert!(iter.next().is_none());

If the last element of the slice is matched, that element will be considered the terminator of the preceding slice. That slice will be the last item returned by the iterator.

let slice = [3, 10, 40, 33];
let mut iter = slice.split_inclusive(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[3]);
assert_eq!(iter.next().unwrap(), &[10, 40, 33]);
assert!(iter.next().is_none());

Returns an iterator over subslices separated by elements that match pred, starting at the end of the slice and working backwards. The matched element is not contained in the subslices.

Examples
let slice = [11, 22, 33, 0, 44, 55];
let mut iter = slice.rsplit(|num| *num == 0);

assert_eq!(iter.next().unwrap(), &[44, 55]);
assert_eq!(iter.next().unwrap(), &[11, 22, 33]);
assert_eq!(iter.next(), None);

As with split(), if the first or last element is matched, an empty slice will be the first (or last) item returned by the iterator.

let v = &[0, 1, 1, 2, 3, 5, 8];
let mut it = v.rsplit(|n| *n % 2 == 0);
assert_eq!(it.next().unwrap(), &[]);
assert_eq!(it.next().unwrap(), &[3, 5]);
assert_eq!(it.next().unwrap(), &[1, 1]);
assert_eq!(it.next().unwrap(), &[]);
assert_eq!(it.next(), None);

Returns an iterator over subslices separated by elements that match pred, limited to returning at most n items. The matched element is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

Examples

Print the slice split once by numbers divisible by 3 (i.e., [10, 40], [20, 60, 50]):

let v = [10, 40, 30, 20, 60, 50];

for group in v.splitn(2, |num| *num % 3 == 0) {
    println!("{group:?}");
}

Returns an iterator over subslices separated by elements that match pred limited to returning at most n items. This starts at the end of the slice and works backwards. The matched element is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

Examples

Print the slice split once, starting from the end, by numbers divisible by 3 (i.e., [50], [10, 40, 30, 20]):

let v = [10, 40, 30, 20, 60, 50];

for group in v.rsplitn(2, |num| *num % 3 == 0) {
    println!("{group:?}");
}

Returns true if the slice contains an element with the given value.

Examples
let v = [10, 40, 30];
assert!(v.contains(&30));
assert!(!v.contains(&50));

If you do not have a &T, but some other value that you can compare with one (for example, String implements PartialEq<str>), you can use iter().any:

let v = [String::from("hello"), String::from("world")]; // slice of `String`
assert!(v.iter().any(|e| e == "hello")); // search with `&str`
assert!(!v.iter().any(|e| e == "hi"));

Returns true if needle is a prefix of the slice.

Examples
let v = [10, 40, 30];
assert!(v.starts_with(&[10]));
assert!(v.starts_with(&[10, 40]));
assert!(!v.starts_with(&[50]));
assert!(!v.starts_with(&[10, 50]));

Always returns true if needle is an empty slice:

let v = &[10, 40, 30];
assert!(v.starts_with(&[]));
let v: &[u8] = &[];
assert!(v.starts_with(&[]));

Returns true if needle is a suffix of the slice.

Examples
let v = [10, 40, 30];
assert!(v.ends_with(&[30]));
assert!(v.ends_with(&[40, 30]));
assert!(!v.ends_with(&[50]));
assert!(!v.ends_with(&[50, 30]));

Always returns true if needle is an empty slice:

let v = &[10, 40, 30];
assert!(v.ends_with(&[]));
let v: &[u8] = &[];
assert!(v.ends_with(&[]));

Returns a subslice with the prefix removed.

If the slice starts with prefix, returns the subslice after the prefix, wrapped in Some. If prefix is empty, simply returns the original slice.

If the slice does not start with prefix, returns None.

Examples
let v = &[10, 40, 30];
assert_eq!(v.strip_prefix(&[10]), Some(&[40, 30][..]));
assert_eq!(v.strip_prefix(&[10, 40]), Some(&[30][..]));
assert_eq!(v.strip_prefix(&[50]), None);
assert_eq!(v.strip_prefix(&[10, 50]), None);

let prefix : &str = "he";
assert_eq!(b"hello".strip_prefix(prefix.as_bytes()),
           Some(b"llo".as_ref()));

Returns a subslice with the suffix removed.

If the slice ends with suffix, returns the subslice before the suffix, wrapped in Some. If suffix is empty, simply returns the original slice.

If the slice does not end with suffix, returns None.

Examples
let v = &[10, 40, 30];
assert_eq!(v.strip_suffix(&[30]), Some(&[10, 40][..]));
assert_eq!(v.strip_suffix(&[40, 30]), Some(&[10][..]));
assert_eq!(v.strip_suffix(&[50]), None);
assert_eq!(v.strip_suffix(&[50, 30]), None);

Binary searches this sorted slice for a given element.

If the value is found then Result::Ok is returned, containing the index of the matching element. If there are multiple matches, then any one of the matches could be returned. The index is chosen deterministically, but is subject to change in future versions of Rust. If the value is not found then Result::Err is returned, containing the index where a matching element could be inserted while maintaining sorted order.

See also binary_search_by, binary_search_by_key, and partition_point.

Examples

Looks up a series of four elements. The first is found, with a uniquely determined position; the second and third are not found; the fourth could match any position in [1, 4].

let s = [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];

assert_eq!(s.binary_search(&13),  Ok(9));
assert_eq!(s.binary_search(&4),   Err(7));
assert_eq!(s.binary_search(&100), Err(13));
let r = s.binary_search(&1);
assert!(match r { Ok(1..=4) => true, _ => false, });

If you want to insert an item to a sorted vector, while maintaining sort order:

let mut s = vec![0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];
let num = 42;
let idx = s.binary_search(&num).unwrap_or_else(|x| x);
s.insert(idx, num);
assert_eq!(s, [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 42, 55]);

Binary searches this sorted slice with a comparator function.

The comparator function should implement an order consistent with the sort order of the underlying slice, returning an order code that indicates whether its argument is Less, Equal or Greater the desired target.

If the value is found then Result::Ok is returned, containing the index of the matching element. If there are multiple matches, then any one of the matches could be returned. The index is chosen deterministically, but is subject to change in future versions of Rust. If the value is not found then Result::Err is returned, containing the index where a matching element could be inserted while maintaining sorted order.

See also binary_search, binary_search_by_key, and partition_point.

Examples

Looks up a series of four elements. The first is found, with a uniquely determined position; the second and third are not found; the fourth could match any position in [1, 4].

let s = [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];

let seek = 13;
assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Ok(9));
let seek = 4;
assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Err(7));
let seek = 100;
assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Err(13));
let seek = 1;
let r = s.binary_search_by(|probe| probe.cmp(&seek));
assert!(match r { Ok(1..=4) => true, _ => false, });

Binary searches this sorted slice with a key extraction function.

Assumes that the slice is sorted by the key, for instance with sort_by_key using the same key extraction function.

If the value is found then Result::Ok is returned, containing the index of the matching element. If there are multiple matches, then any one of the matches could be returned. The index is chosen deterministically, but is subject to change in future versions of Rust. If the value is not found then Result::Err is returned, containing the index where a matching element could be inserted while maintaining sorted order.

See also binary_search, binary_search_by, and partition_point.

Examples

Looks up a series of four elements in a slice of pairs sorted by their second elements. The first is found, with a uniquely determined position; the second and third are not found; the fourth could match any position in [1, 4].

let s = [(0, 0), (2, 1), (4, 1), (5, 1), (3, 1),
         (1, 2), (2, 3), (4, 5), (5, 8), (3, 13),
         (1, 21), (2, 34), (4, 55)];

assert_eq!(s.binary_search_by_key(&13, |&(a, b)| b),  Ok(9));
assert_eq!(s.binary_search_by_key(&4, |&(a, b)| b),   Err(7));
assert_eq!(s.binary_search_by_key(&100, |&(a, b)| b), Err(13));
let r = s.binary_search_by_key(&1, |&(a, b)| b);
assert!(match r { Ok(1..=4) => true, _ => false, });

Transmute the slice to a slice of another type, ensuring alignment of the types is maintained.

This method splits the slice into three distinct slices: prefix, correctly aligned middle slice of a new type, and the suffix slice. The method may make the middle slice the greatest length possible for a given type and input slice, but only your algorithm’s performance should depend on that, not its correctness. It is permissible for all of the input data to be returned as the prefix or suffix slice.

This method has no purpose when either input element T or output element U are zero-sized and will return the original slice without splitting anything.

Safety

This method is essentially a transmute with respect to the elements in the returned middle slice, so all the usual caveats pertaining to transmute::<T, U> also apply here.

Examples

Basic usage:

unsafe {
    let bytes: [u8; 7] = [1, 2, 3, 4, 5, 6, 7];
    let (prefix, shorts, suffix) = bytes.align_to::<u16>();
    // less_efficient_algorithm_for_bytes(prefix);
    // more_efficient_algorithm_for_aligned_shorts(shorts);
    // less_efficient_algorithm_for_bytes(suffix);
}
🔬 This is a nightly-only experimental API. (portable_simd)

Split a slice into a prefix, a middle of aligned SIMD types, and a suffix.

This is a safe wrapper around slice::align_to, so has the same weak postconditions as that method. You’re only assured that self.len() == prefix.len() + middle.len() * LANES + suffix.len().

Notably, all of the following are possible:

  • prefix.len() >= LANES.
  • middle.is_empty() despite self.len() >= 3 * LANES.
  • suffix.len() >= LANES.

That said, this is a safe method, so if you’re only writing safe code, then this can at most cause incorrect logic, not unsoundness.

Panics

This will panic if the size of the SIMD type is different from LANES times that of the scalar.

At the time of writing, the trait restrictions on Simd<T, LANES> keeps that from ever happening, as only power-of-two numbers of lanes are supported. It’s possible that, in the future, those restrictions might be lifted in a way that would make it possible to see panics from this method for something like LANES == 3.

Examples
#![feature(portable_simd)]

let short = &[1, 2, 3];
let (prefix, middle, suffix) = short.as_simd::<4>();
assert_eq!(middle, []); // Not enough elements for anything in the middle

// They might be split in any possible way between prefix and suffix
let it = prefix.iter().chain(suffix).copied();
assert_eq!(it.collect::<Vec<_>>(), vec![1, 2, 3]);

fn basic_simd_sum(x: &[f32]) -> f32 {
    use std::ops::Add;
    use std::simd::f32x4;
    let (prefix, middle, suffix) = x.as_simd();
    let sums = f32x4::from_array([
        prefix.iter().copied().sum(),
        0.0,
        0.0,
        suffix.iter().copied().sum(),
    ]);
    let sums = middle.iter().copied().fold(sums, f32x4::add);
    sums.reduce_sum()
}

let numbers: Vec<f32> = (1..101).map(|x| x as _).collect();
assert_eq!(basic_simd_sum(&numbers[1..99]), 4949.0);
🔬 This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this slice are sorted.

That is, for each element a and its following element b, a <= b must hold. If the slice yields exactly zero or one element, true is returned.

Note that if Self::Item is only PartialOrd, but not Ord, the above definition implies that this function returns false if any two consecutive items are not comparable.

Examples
#![feature(is_sorted)]
let empty: [i32; 0] = [];

assert!([1, 2, 2, 9].is_sorted());
assert!(![1, 3, 2, 4].is_sorted());
assert!([0].is_sorted());
assert!(empty.is_sorted());
assert!(![0.0, 1.0, f32::NAN].is_sorted());
🔬 This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this slice are sorted using the given comparator function.

Instead of using PartialOrd::partial_cmp, this function uses the given compare function to determine the ordering of two elements. Apart from that, it’s equivalent to is_sorted; see its documentation for more information.

🔬 This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this slice are sorted using the given key extraction function.

Instead of comparing the slice’s elements directly, this function compares the keys of the elements, as determined by f. Apart from that, it’s equivalent to is_sorted; see its documentation for more information.

Examples
#![feature(is_sorted)]

assert!(["c", "bb", "aaa"].is_sorted_by_key(|s| s.len()));
assert!(![-2i32, -1, 0, 3].is_sorted_by_key(|n| n.abs()));

Returns the index of the partition point according to the given predicate (the index of the first element of the second partition).

The slice is assumed to be partitioned according to the given predicate. This means that all elements for which the predicate returns true are at the start of the slice and all elements for which the predicate returns false are at the end. For example, [7, 15, 3, 5, 4, 12, 6] is a partitioned under the predicate x % 2 != 0 (all odd numbers are at the start, all even at the end).

If this slice is not partitioned, the returned result is unspecified and meaningless, as this method performs a kind of binary search.

See also binary_search, binary_search_by, and binary_search_by_key.

Examples
let v = [1, 2, 3, 3, 5, 6, 7];
let i = v.partition_point(|&x| x < 5);

assert_eq!(i, 4);
assert!(v[..i].iter().all(|&x| x < 5));
assert!(v[i..].iter().all(|&x| !(x < 5)));

Checks if all bytes in this slice are within the ASCII range.

Checks that two slices are an ASCII case-insensitive match.

Same as to_ascii_lowercase(a) == to_ascii_lowercase(b), but without allocating and copying temporaries.

Returns an iterator that produces an escaped version of this slice, treating it as an ASCII string.

Examples

let s = b"0\t\r\n'\"\\\x9d";
let escaped = s.escape_ascii().to_string();
assert_eq!(escaped, "0\\t\\r\\n\\'\\\"\\\\\\x9d");
🔬 This is a nightly-only experimental API. (byte_slice_trim_ascii)

Returns a byte slice with leading ASCII whitespace bytes removed.

‘Whitespace’ refers to the definition used by u8::is_ascii_whitespace.

Examples
#![feature(byte_slice_trim_ascii)]

assert_eq!(b" \t hello world\n".trim_ascii_start(), b"hello world\n");
assert_eq!(b"  ".trim_ascii_start(), b"");
assert_eq!(b"".trim_ascii_start(), b"");
🔬 This is a nightly-only experimental API. (byte_slice_trim_ascii)

Returns a byte slice with trailing ASCII whitespace bytes removed.

‘Whitespace’ refers to the definition used by u8::is_ascii_whitespace.

Examples
#![feature(byte_slice_trim_ascii)]

assert_eq!(b"\r hello world\n ".trim_ascii_end(), b"\r hello world");
assert_eq!(b"  ".trim_ascii_end(), b"");
assert_eq!(b"".trim_ascii_end(), b"");
🔬 This is a nightly-only experimental API. (byte_slice_trim_ascii)

Returns a byte slice with leading and trailing ASCII whitespace bytes removed.

‘Whitespace’ refers to the definition used by u8::is_ascii_whitespace.

Examples
#![feature(byte_slice_trim_ascii)]

assert_eq!(b"\r hello world\n ".trim_ascii(), b"hello world");
assert_eq!(b"  ".trim_ascii(), b"");
assert_eq!(b"".trim_ascii(), b"");

Copies self into a new Vec.

Examples
let s = [10, 40, 30];
let x = s.to_vec();
// Here, `s` and `x` can be modified independently.
🔬 This is a nightly-only experimental API. (allocator_api)

Copies self into a new Vec with an allocator.

Examples
#![feature(allocator_api)]

use std::alloc::System;

let s = [10, 40, 30];
let x = s.to_vec_in(System);
// Here, `s` and `x` can be modified independently.

Creates a vector by repeating a slice n times.

Panics

This function will panic if the capacity would overflow.

Examples

Basic usage:

assert_eq!([1, 2].repeat(3), vec![1, 2, 1, 2, 1, 2]);

A panic upon overflow:

// this will panic at runtime
b"0123456789abcdef".repeat(usize::MAX);

Flattens a slice of T into a single value Self::Output.

Examples
assert_eq!(["hello", "world"].concat(), "helloworld");
assert_eq!([[1, 2], [3, 4]].concat(), [1, 2, 3, 4]);

Flattens a slice of T into a single value Self::Output, placing a given separator between each.

Examples
assert_eq!(["hello", "world"].join(" "), "hello world");
assert_eq!([[1, 2], [3, 4]].join(&0), [1, 2, 0, 3, 4]);
assert_eq!([[1, 2], [3, 4]].join(&[0, 0][..]), [1, 2, 0, 0, 3, 4]);
👎 Deprecated since 1.3.0:

renamed to join

Flattens a slice of T into a single value Self::Output, placing a given separator between each.

Examples
assert_eq!(["hello", "world"].connect(" "), "hello world");
assert_eq!([[1, 2], [3, 4]].connect(&0), [1, 2, 0, 3, 4]);

Returns a vector containing a copy of this slice where each byte is mapped to its ASCII upper case equivalent.

ASCII letters ‘a’ to ‘z’ are mapped to ‘A’ to ‘Z’, but non-ASCII letters are unchanged.

To uppercase the value in-place, use make_ascii_uppercase.

Returns a vector containing a copy of this slice where each byte is mapped to its ASCII lower case equivalent.

ASCII letters ‘A’ to ‘Z’ are mapped to ‘a’ to ‘z’, but non-ASCII letters are unchanged.

To lowercase the value in-place, use make_ascii_lowercase.

Trait Implementations

Converts this type into a shared reference of the (usually inferred) input type.

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Formats the value using the given formatter. Read more

The resulting type after dereferencing.

Dereferences the value.

Mutably dereferences the value.

This method returns an Ordering between self and other. Read more

Compares and returns the maximum of two values. Read more

Compares and returns the minimum of two values. Read more

Restrict a value to a certain interval. Read more

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

This method returns an ordering between self and other values if one exists. Read more

This method tests less than (for self and other) and is used by the < operator. Read more

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

This method tests greater than (for self and other) and is used by the > operator. Read more

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Returns the argument unchanged.

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into)

Uses borrowed data to replace owned data, usually by cloning. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.